Today we’re taking a look at Luma AI’s Imagine 3D, a text-to-3D service.
review
Hands On With The Kingroon KP3S Pro S1, Part 3
Our review of the Kingroon KP3S Pro S1 concludes with print results and final thoughts.
Hands On With The Kingroon KP3S Pro S1, Part 2
Our review of the Kingroon KP3S Pro S1 continues with setup & calibration, operations and software.
Hands On With The Kingroon KP3S Pro S1, Part 1
We recently got our hands on Kingroon’s latest 3D printer, the KP3S Pro S1, and we were eager to see what this new 3D printer had to offer.
Hands On With The Mintion Beagle 2 3D Printer Camera
We have been testing the Mintion Beagle V2 Camera for 3D printing, and discovered it’s far more than just a camera.
Popular Science’s Filament Recommendations Disappoint
I’m reading a story from Popular Science about the “best 3D printer filaments”.
Hands On With The Voxelab Aquila D1 3D Printer, Part 3
Our test of the Voxelab Aquila D1 3D printer concludes with a look at print results and final thoughts.
Hands On With The Voxelab Aquila D1 3D Printer, Part 2
Our test of the Voxelab Aquila D1 3D printer continues with a look at setup, calibration, operations and software.
Hands On With The Voxelab Aquila D1 3D Printer, Part 1
We recently received a Voxelab Aquila D1 at the lab, the latest model in the Aquila product line and had a chance to assemble and give it a thorough test.
Hands On With The High Speed Anycubic Kobra 2 3D Printer, Part 3
Our test of the new high speed desktop 3D printer from Anycubic, the Kobra 2, concludes with a look at software print results, and final thoughts.
Hands On With The High Speed Anycubic Kobra 2 3D Printer, Part 2
Our test of the new high speed desktop 3D printer from Anycubic, the Kobra 2, continues with a look at setup, calibration, and operations.
Hands On With The High Speed Anycubic Kobra 2 3D Printer, Part 1
We were able to test the new high speed desktop 3D printer from Anycubic, the Kobra 2.
Hands On With The Anycubic Photon M5s 3D Printer, Part 3
Our review of the Anycubic Photon Mono M5s MSLA 3D printer concludes with a look at software, print results and final thoughts.
Hands On With The Anycubic Photon M5s 3D Printer, Part 2
Our review of the Anycubic Photon Mono M5s MSLA 3D printer continues with a look at operations and failure modes.
Hands On With The Anycubic Photon M5s 3D Printer, Part 1
We were able to test the highly-touted Anycubic Photon Mono M5s MSLA 3D printer in our lab.
Hands On With Anycubic’s High Clear 3D Printer Resin
We had the opportunity to test out Anycubic’s new High Clear 3D printer resin — it’s completely transparent!
Hands On With AESUB 3D Scanning Spray
I recently had the opportunity to try out AESUB’s 3D scanning spray.
Hands On With The Mole 3D Scanner, Part 3
Our hands on test of the new Mole 3D scanner concludes with software, scan results and final thoughts.
Hands On With The Mole 3D Scanner, Part 2
Our look at the new Mole 3D scanner continues with operations and alignment.
Hands On With The Mole 3D Scanner, Part 1
We’ve been quietly testing the new Mole 3D scanner for a few weeks and have a full, hands-on review.
Hands On With The LulzBot TAZ Sidekick 3D Printer, Part 3
Our hands on review of the LulzBot Sidekick 747 3D printer ends with a look at software, print results and final thoughts.
Hands On With The LulzBot TAZ Sidekick 3D Printer, Part 2
Our hands on review of the LulzBot Sidekick 747 3D printer continues with a look at setup, calibration and operations .
Hands On With The LulzBot TAZ Sidekick 3D Printer, Part 1
We’ve been testing a LulzBot Sidekick 747 3D printer for the last few months.
3D Scanning for Everyone? Not Yet
Polycam falls short in reality capture of detailed parts.
2022: A Look At The Top 10 3D Printing Developments
Charles R. Goulding and Valentina Alzate countdown their top ten 3D print developments for 2022.
Hands On With Carima CMYK Non-Toxic 3D Printer Resin, Part 2
Our review of Carina’s CMYK resins continues with print results and final thoughts.
Hands On With Carima CMYK Non-Toxic 3D Printer Resin, Part 1
We were provided the opportunity to test Carima’s CMYK non-toxic 3D printer resin.
Hands On With The Anycubic M3 Premium 3D Printer, Part 3
Our review of the new Anycubic M3 Premium resin 3D printer wraps ups with a look at software, print quality and final thoughts.
Hands On With The Anycubic M3 Premium 3D Printer, Part 2
Our review of the new Anycubic M3 Premium resin 3D printer continues with a look at setup, calibration, and software.
Hands On With The Anycubic M3 Premium 3D Printer, Part 1
Our lab was busy taking a close look at the new Anycubic M3 Premium resin 3D printer.
Hands On With Our Hands-On 3D Printing Reviews, 2022 Edition
An update to our comprehensive list of our hands on equipment, software and material reviews.
Hands on with the Luma NeRF 3D Scanner App
I’ve been testing the Luma 3D scanning app, which uses the new NeRF method, and it’s amazing.
Hands on with Scanamaze
I tested Scanamaze, a new handheld 3D scanning app.
Hands On With The Kingroon KP5L 3D Printer, Part 3
Our look at the Kingroon KP5L 3D printer concludes with a look at software, print quality and final thoughts.
Hands On With The Kingroon KP5L 3D Printer, Part 2
Our lab test of the Kingroon KP5L continues with a look at setup, calibration and operations.
Hands On With The Kingroon KP5L 3D Printer, Part 1
Our lab has been quite busy lately, and this time we’re looking at the Kingroon KPL5 3D printer.
Hands On With a $189 3D Printer: The Anycubic Kobra Go, Part 3
Our test of the Kobra Go desktop 3D printer concludes with a look at print quality and our final thoughts.
Hands On With a $189 3D Printer: The Anycubic Kobra Go, Part 2
Our test of the Kobra Go desktop 3D printer continues with a look at Setup, calibration and operations.
Hands On With a $189 3D Printer: The Anycubic Kobra Go, Part 1
Just prior to its release, we obtained a Kobra Go 3D printer from Anycubic and gave it a good test.
Hands On With The Sovol SV01 PRO 3D Printer, Part 3
Our testing of the Sovol SV01 Pro 3D printer concludes with a look at print quality and final thoughts.
Hands On With The Sovol SV01 PRO 3D Printer, Part 2
Our testing of the Sovol SV01 Pro 3D printer continues with a look at operations.
Hands On With The Sovol SV01 PRO 3D Printer, Part 1
The Sovol SV01 Pro 3D printer spent some time in our lab being tested.
Heavy Metal – Book Review
Charles R. Goulding reviews a new book on shipbuilding, where 3D printing can take a lead role.
Hands on with the MINGDA Magician X 3D Printer, Part 3
Our test of the MINGDA Magician X desktop 3D printer finishes with a look at software, print quality and final thoughts.
Hands on with the MINGDA Magician X 3D Printer, Part 2
Our look at the MINGDA Magician X desktop 3D printer continues with setup, calibration and operation.
Hands on with the MINGDA Magician X 3D Printer, Part 1
Our lab has been busy exploring the MINGDA Magician X desktop 3D printer.
Hands On With The Anycubic Kobra Plus 3D Printer, Part 3
Our review of the Anycubic Kobra Plus concludes with a look at software, print quality and final thoughts.
Hands On With The Anycubic Kobra Plus 3D Printer, Part 2
Our look at the Anycubic Kobra Plus 3D printer continues with setup, calibration and operation.
Hands On With The Anycubic Kobra Plus 3D Printer, Part 1
Anycubic’s Kobra line has a new member, the Kobra Plus.
Hands On With The Pantheon HS3 High Speed 3D Printer, Part 2
Our look at Pantheon Design’s incredible HS3 continues with operations, materials, software and our final thoughts. This is part two of a two part series, please read part one. Pantheon HS3 Operations Operating the HS3, or at least our pre-production unit, was identical to operating any Duet-equipped 3D printer. The web interface was quite detailed,… Continue reading Hands On With The Pantheon HS3 High Speed 3D Printer, Part 2
Hands On With The Pantheon HS3 High Speed 3D Printer, Part 1
We’ve just finished testing the Pantheon HS3, and wow, what a 3D printer!
Hands On With The Creality Ender-3 S1, Part 3
Our look at the Creality Ender-3 S1 desktop 3D printer ends with a look at software and final thoughts.
Hands On With The Creality Ender-3 S1, Part 2
Our look at the Creality Ender-3 S1 desktop 3D printer continues with setup, calibration and operations.
Hands On With The Creality Ender-3 S1, Part 1
We’ve been testing the Creality Ender-3 S1 desktop 3D printer.
Hands On With SuperSlicer’s Calibration Set
I’ve been playing with SuperSlicer for the past week and have some thoughts.
Hands On With The Anycubic AirPure
We gave the new Anycubic Airpure a test in our lab.
Hands On With the Anycubic M3 Plus 3D Printer, Part 3
Our review of the Anycubic Photon M3 concludes with an examination of the software environment, print quality and final thoughts.
Hands On With the Anycubic M3 Plus 3D Printer, Part 2
Our review of the Anycubic Photon M3 continues with our setup and calibration experience.
Hands On With the Anycubic M3 Plus 3D Printer, Part 1
Not long after testing the Anycubic Photon M3, we got our hands on the very different Anycubic Photon M3 Plus 3D printer.
Hands On With Scaniverse
I took a look at a Scaniverse, a very useful handheld 3D scanning app.
Hands On With The Anycubic Photon M3 3D Printer, Part 2
Our hands on test of the Anycubic Photon M3 3D printer continues, with a lot at operations, software and final thoughts.
Hands On With The Anycubic Photon M3 3D Printer, Part 1
Somehow we’ve also managed to test yet another device this week, the Anycubic Photon M3 desktop resin 3D printer.
Hands On With RealityScan, Part 2
Our evaluation of Capturing Reality’s new mobile 3D scanning app continues.
Hands On With RealityScan, Part 1
Capturing Reality released a mobile version of their powerful 3D scanning system, and we gave it a test.
Hands On with the Anycubic Kobra Desktop 3D Printer, Part 2
Our hands on review of the Anycubic Kobra desktop 3D printer continues with a look at operations, print results and conclusions.
Hands On with the Anycubic Kobra Desktop 3D Printer, Part 1
Our busy lab managed to give the Anycubic Kobra desktop 3D printer a thorough workout.
Hands On With The Creality Sermoon V1 Pro 3D Printer, Part 2
Our testing of the Creality Sermoon V1 Pro desktop 3D printer continues, with a look at operations, advanced materials and remote management.
Hands On With The Creality Sermoon V1 Pro 3D Printer, Part 1
Our lab has been very busy lately, this time testing the Creality Sermoon V1 Pro desktop 3D printer.
Are These Really The Best 3D Printers of 2022?
’ve encountered one of those “Best 3D Printers” stories, and want to tell you why they’re really not informative.
Looking Back at 3D Print Trends in 2021
The year 2021 has ended, and it’s time to look back to see what happened in 3D printing and Additive Manufacturing.
Top 3D Printing Developments of 2021
Charles R. Goulding and Preeti Sulibhavi review the major 3D print stories of 2021.
Our Top 3D Print Stories of 2021, Determined By You
It’s the end of the year, and I wondered which stories gathered the most views by Fabbaloo readers.
Hands On With The Voxelab Aquila S2 3D Printer, Part 2
Testing the Aquila S2 desktop 3D printer continues with an examination of print results.
Hands On With The Voxelab Aquila S2 3D Printer, Part 1
Our lab has been quite busy lately, and this time we’re reviewing the Voxelab Aquila S2 desktop 3D printer.
Hands On With The Anycubic Photon Mono X 6K 3D Printer, Part 3
We extensively tested the Anycubic Photon Mono X 6K 3D printer and the matching Wash and Cure Plus Machine. Here we discuss software and wrap up.
Hands On With The Anycubic Photon Mono X 6K 3D Printer, Part 2
Our testing of the Anycubic Photon Mono X 6K 3D printer continues with a review of operations and post processing.
Hands On With The Anycubic Photon Mono X 6K 3D Printer, Part 1
We’ve just completed several weeks of testing of Anycubic’s new Photon Mono X 6K resin 3D printer.
Hands On With The Voxelab Aries 3D Printer, Part 2
Our look at the new Voxelab Aries desktop 3D printer continues with the setup and operation.
Hands On With The Voxelab Aries 3D Printer, Part 1
Our test lab has been quite busy lately. This time we reviewed the Voxelab Aries desktop 3D printer.
James Dyson’s ‘Invention: A Life’ Book Review
This autobiography is a remarkable book and a must-read for those interested in innovation, design, manufacturing, and business.
Hands On With The Voxelab Aquila X2 Desktop 3D Printer, Part 2
My testing of the Voxelab Aquila X2 desktop 3D printer continues.
Hands On With The Voxelab Aquila X2 Desktop 3D Printer, Part 1
I had a chance to assemble and test Voxelab’s new Aquila X2 desktop 3D printer.
Hands On With The Artec Leo 3D Scanner, Part 3
Artec 3D provided us with a Leo 3D scanner, so we put it through some tests. Here we review several sample 3D scans taken with the device.
Hands On With The Artec Leo 3D Scanner, Part 2
Artec 3D provided us with a Leo 3D scanner, so we put it through some tests. We examine the operation of the device.
Hands On With The Artec Leo 3D Scanner, Part 1
Artec 3D provided us with a Leo 3D scanner, so we put it through some tests. First let’s look at features and setup.
Hands On With The Anycubic Vyper 3D Printer, Part 3
I had the opportunity to test out the new Vyper 3D printer from Anycubic in our lab: print results.
Hands On With The Anycubic Vyper 3D Printer, Part 2
I had the opportunity to test out the new Vyper 3D printer from Anycubic in our lab: setup and printing.
Hands On With The Anycubic Vyper 3D Printer, Part 1
I had the opportunity to test out the new Vyper 3D printer from Anycubic in our lab: features and unpacking.
THEFUTUREOFJEWELRY: Hands-On With Custom Jewelry
I recently customized a signet ring brought to life via web app and 3D printing.
Hands On With The Creality LD-006, Part Three: Results And Final Thoughts
I had a chance to try out the Creality LD-006 desktop 3D printer. In this post we look at post-processing the prints and wrap up the series.
Hands On With The Creality LD-006, Part Two: Setup And Operation
I had a chance to try out the Creality LD-006 desktop 3D printer. In this post we look at setting up and operating the machine.
Hands On With The Creality LD-006, Part One: Unboxing
I had a chance to try out the Creality LD-006 desktop 3D printer. In this post we look at the machine’s description and unboxing.
Our Top Ten 3D Printing Stories of 2020
We’ve cranked up the analytics engine to see which Fabbaloo 3D printing stories were most read in 2020.
A Reader Checks Out The Powerbelt3D Zero 3D Printer Kit
One of our technical readers took a deep dive into the new Powerbelt3D Zero 3D printer kit.
Behind The Scenes Of 3D Printer Reviews
I’ve been watching Fabbaloo friend Joel Telling’s series of videos on his testing of the Craftbot FLOW IDEX XL, and the process seems quite familiar to me.