interview

Mazotta Checks out Robo3D

3D printing videographer Andrew Mazzotta took a swing by Robo3D’s San Diego offices to check out their operations. 

The Masters & Munn Code

Earlier this week our design of the week featured Icarus Had a Sister, by Masters & Munn. While we’re certain you’ll agree the work is astonishing, we also must tell the incredible story of how it came to be, as revealed during a long conversation at the close of the 2013 3D Printshow.   The… Continue reading The Masters & Munn Code

Léo Marius Interviewed

Remember that amazing 3D printed SLR camera? It was created by French designer Léo Marius, who recently was interviewed by Sculpteo.    In the interview, Marius says the most difficult and challenging aspect of the OpenReflex design was in fact the shutter:    Habitually a shutter is an extremely precise mechanical piece, and I had… Continue reading Léo Marius Interviewed

An Interview with Shapeways Bart Veldhuizen

Andrew Mazotta of 3D Hacker posted a video interview with Shapeways’ Bart Veldhuizen, recorded at Shapeways’ European headquarters in Eindhoven.    In the interview Mazotta goes through the basics, starting by examining the history of Shapeways. Veldhuizen, European Community Manager for Shapeways, has been with the company for five years and has witnessed the tremendous… Continue reading An Interview with Shapeways Bart Veldhuizen

Avi Reichental Talks

3D Systems President and CEO Avi Reichental was interviewed by Huffington Post correspondent Lilia Ziamou. The interview material is basic, as it’s intended for folks new to the concept of 3D printing.    However, Reichental spends many words on 3D Systems’ strategy of “democratizing” 3D printing, talking about Cubify, CAD design and the ease of… Continue reading Avi Reichental Talks

An Interview With Limor Fried

Fabbaloo recently caught up with Adafruit’s Limor Fried to discuss her views on 3D printing. Here’s the interview:    Fabbaloo: Adafruit recently partnered with MakerBot to produce a bundle of DIY electronics and the capability of 3D printing. Do you see further collaborations with 3D printer manufacturers or 3D print services?   Limor Fried: We’ll… Continue reading An Interview With Limor Fried

The B9Creator Creator Speaks

Core77 published a detailed interview with Michael Joyce (of Deadwood, South Dakota), the creator of the B9Creator.    The B9Creator was a hugely successful Kickstarter project to fund the development of a resin-based personal 3D printer. How successful? Over USD$500,000 was raised, enabling Joyce to get production going.     We encourage you to read the… Continue reading The B9Creator Creator Speaks

Slic3r Author Interviewed

RepRap’s Josef Prusa recently interviewed Slic3r author Alessandro Ranellucci in Prague.   Ranellucci initially used Skeinforge to prepare his 3D models for printing, as did most small scale 3D printers of the day. Like everyone else, Ranellucci was baffled by the monstrously complex parameterization of Skeinforge when trying to print small architectural models on a ShaperCube. He… Continue reading Slic3r Author Interviewed

Hot Pop Factory

Two Toronto architects have used 3D printing technology to start a new business in their own home: designing and manufacturing jewelry. Matthew Compeau and Biying Miao have launched Hot Pop Factory, producer of striking 3D printed jewelry designs. Hot Pop Factory offers inexpensive necklace, earrings and rings based on a consistent design theme.   But… Continue reading Hot Pop Factory

Bre Speaks!

We recently contacted MakerBot chief Bre Pettis and asked him a few questions for this exclusive interview below. We have suspicions he and his crew at MakerBot are working on something really interesting, but as you’ll see he’s not telling. But he is excited.  Fabbaloo: MakerBot has been expanding very rapidly over the past year. What’s… Continue reading Bre Speaks!

Hod Lipson in The Inquirer

There’s a terrific interview with 3D printing researcher Hod Lipson of Cornell University in The Inquirer.   Lipson discusses his life and how it led him to performing advanced research on 3D printing and related technologies. He talks about how 3D printing technology is sometimes viewed mistakenly by the general public:    Lipson says people… Continue reading Hod Lipson in The Inquirer

3D Print Meat With Your Imagine 3D Printer

We spoke with Essential Dynamics Sales Manager, Stevie Green regarding their new personal 3D printer, the Imagine 3D Printer. As we reported earlier, this printer is unique among ready-to-go assembled personal 3D printers as it uses syringes instead of the more common hot plastic extruders. This means it is capable of printing room-temperature gooey substances,… Continue reading 3D Print Meat With Your Imagine 3D Printer

Wohlers On 3D Printing Futures

At a recent seminar we were able to meet with 3D printing consultant Terry Wohlers. Terry has been a leading 3D printing and additive manufacturing industry consultant and prolific speaker for over 25 years. Each year he publishes the definitive report on the industry, available from his website. We asked his opinion on 3D printing… Continue reading Wohlers On 3D Printing Futures

More on the 3D Systems’ BotMill Acquisition

We were a tiny bit surprised last week when we learned that up and coming 3D printer manufacturer and marketer BotMill was snapped up by industry giant 3D Systems. At the time there was not a lot of information available about this move, so we contacted 3D Systems VP of Global Marketing to clarify the… Continue reading More on the 3D Systems’ BotMill Acquisition

Gartner’s Jackie Fenn on 3D Printing

Fabbaloo interviewed Gartner Analyst Jackie Fenn, VP and Gartner Fellow covering Emerging Trends. Jackie writes on a variety of new technologies and approaches, one of which has been 3D printing.    Jackie is the originator of Gartner’s famous Hype Cycle, which proposes that every technology follows a consistent pattern of interest through its lifecycle. Jackie’s… Continue reading Gartner’s Jackie Fenn on 3D Printing

Puzzling BitTorrent and 3D Printing

  There’s a fascinating interview of Bram Cohen on the Shapeways Blog. That name sounds familiar? It should, because he’s the inventor of BitTorrent, that famous or infamous highly efficient network transfer protocol that swept the world and changed how big media companies operator forever. But what’s this got to do with 3D printing? Turns… Continue reading Puzzling BitTorrent and 3D Printing

An Interview with Sculptor Bathsheba Grossman

We’ve noticed Grossman before and been very impressed with her work. Now we find a full-length interview with the sculptor from Desktop Engineering Online, in which she explains how she came to use 3D print tech. Highlights we observed: Grossman feels that she was “backed into” working with 3D printing as a way to accomplish… Continue reading An Interview with Sculptor Bathsheba Grossman

Desktop Factory is Ponoko’d

Our friends at the revolutionary manufacturing service Ponoko recently interviewed Cathy Lewis, CEO of Desktop Factory, the company attempting to market a quality 3D printer for less than US$5,000. We’ve interviewed Ms. Lewis here, but Ponoko covered different areas. Some highlights we noticed: Desktop Factory believes their big opportunity lies in providing 3D technology to… Continue reading Desktop Factory is Ponoko’d

Desktop Factory CEO Cathy Lewis, Part 1

Recently we had the opportunity to speak with Cathy Lewis, CEO of Desktop Factory, a company focused on delivering a breakthrough product for the 3D Print industry: an inexpensive desktop 3D printer suitable for use in small businesses, schools and even homes. The sub-USD$5000 device isn’t yet available, but CEO Cathy Lewis and team are… Continue reading Desktop Factory CEO Cathy Lewis, Part 1

Ponoko Exclusive

One of the most interesting companies in today’s fabrication space is Ponoko, a New Zealand based start-up that seems to be a mashup of a 3D print service, eBay and design library. We thought we’d better take a deeper look at them, and we interviewed Steven Kempton, Ponoko’s Blog Editor. Fabbaloo: Tell us the story… Continue reading Ponoko Exclusive