This is the second part of a two-part series on the Formlabs Form 2 desktop 3D printer.
hands on
Hands on with the Form 2 Desktop 3D Printer, Part 1
Our lab finally got our hands on the Formlabs Form 2 desktop 3D printer and I’d like to tell you about our experience.
ALMOST Hands on with the Stratasys F370 Prototyping 3D Printer
Ok, we did not get an F370 in the mail to test, but we did speak at length with someone who actually runs one. The machine is the largest model in a new line of professional 3D printers just announced by Stratasys.
A 3D Print Newbie Tries Out MakerBot’s Replicator+
When I was asked if I would mind reviewing a 3D printer from a new user perspective, tt took me all of a few seconds to agree to the testing and then counted down the days for the printer to arrive.
Hands on with the Replicator+: Part Three, Operations
After a very long wait, MakerBot recently released a new 3D printer, the Replicator+. We had an opportunity to give it a good test. This is part 3, read part 1 and part 2 here.
Hands on with the Replicator+: Part Two, Software
After a very long wait, MakerBot recently released a new 3D printer, the Replicator+. We had an opportunity to give it a good test. This is part 2, read part 1 here.
Hands on with the Replicator+: Part One, Setup
After a very long wait, MakerBot recently released a new 3D printer, the Replicator+. We had an opportunity to give it a good test.
Hands on With Fiberlogy’s new FiberFlex 40D 3D Printer Filament
We obtained a small sample of Fiberlogy’s new FiberFlex 40D 3D printer filament and performed some basic testing.
Hands On With Afinia’s ES360 Desktop 3D Scanner
This week we had the chance to test out Afinia’s ES360 tabletop 3D scanning system.
Hands On With Autodesk’s Sculpt+
I’ve finally had a chance to check out Autodesk’s tablet-based Sculpt+ 3D creation app.
Hands On With The 3Dwox 3D Printer Part 2: The First Real 3DP For Consumers?
In part 1 of this series, we explained how to set up the 3Dwox, which turns out to be fantastically simple and takes only a few minutes. Today we’re looking at the printing capabilities of the machine.
Hands On With The 3Dwox 3D Printer Part 3: The First Real 3DP For Consumers?
Today we’re concluding our series on the 3Dwox, one of the most interesting 3D printers we’ve ever seen.
Hands On With The 3Dwox 3D Printer Part 1: The First Real 3DP For Consumers?
Our lab has been testing Sindoh’s new 3Dwox desktop 3D printer, and it seems to be a fundamentally different device that we think could be the first “real” 3D printer usable by consumers.
Hands On With The Ultimaker 2 Extended: Materials and Conclusion
This is part 4 of our short series on the Ultimaker 2 Extended. Today we’re talking about the materials used by this oversize 3D printer.
Hands On With The Ultimaker 2 Extended: Software
This is part 2 of our short series on the Ultimaker 2 Extended. Today we’re talking about software.
Hands On With The Ultimaker 2 Extended: Unboxing and Setup
We’ve got our hands on a real-life Ultimaker 2 Extended and will take you through the experience of using one. In this multiple-part series, we will first investigate the machine setup.
Hands On With The Ultimaker 2 Extended: Operations
This is part 3 of our short series on the Ultimaker 2 Extended. Today we’re talking about operating this huge 3D printer.