We have been testing the Mintion Beagle V2 Camera for 3D printing, and discovered it’s far more than just a camera.
hands on
Hands On With The Voxelab Aquila D1 3D Printer, Part 3
Our test of the Voxelab Aquila D1 3D printer concludes with a look at print results and final thoughts.
Hands On With The Voxelab Aquila D1 3D Printer, Part 2
Our test of the Voxelab Aquila D1 3D printer continues with a look at setup, calibration, operations and software.
Hands On With The Voxelab Aquila D1 3D Printer, Part 1
We recently received a Voxelab Aquila D1 at the lab, the latest model in the Aquila product line and had a chance to assemble and give it a thorough test.
Hands On With The High Speed Anycubic Kobra 2 3D Printer, Part 3
Our test of the new high speed desktop 3D printer from Anycubic, the Kobra 2, concludes with a look at software print results, and final thoughts.
Hands On With The High Speed Anycubic Kobra 2 3D Printer, Part 2
Our test of the new high speed desktop 3D printer from Anycubic, the Kobra 2, continues with a look at setup, calibration, and operations.
Hands On With The High Speed Anycubic Kobra 2 3D Printer, Part 1
We were able to test the new high speed desktop 3D printer from Anycubic, the Kobra 2.
Hands On With The Anycubic Photon M5s 3D Printer, Part 3
Our review of the Anycubic Photon Mono M5s MSLA 3D printer concludes with a look at software, print results and final thoughts.
Hands On With The Anycubic Photon M5s 3D Printer, Part 2
Our review of the Anycubic Photon Mono M5s MSLA 3D printer continues with a look at operations and failure modes.
Hands On With The Anycubic Photon M5s 3D Printer, Part 1
We were able to test the highly-touted Anycubic Photon Mono M5s MSLA 3D printer in our lab.
Hands On With Anycubic’s High Clear 3D Printer Resin
We had the opportunity to test out Anycubic’s new High Clear 3D printer resin — it’s completely transparent!
Hands On With AESUB 3D Scanning Spray
I recently had the opportunity to try out AESUB’s 3D scanning spray.
Hands On With The Mole 3D Scanner, Part 3
Our hands on test of the new Mole 3D scanner concludes with software, scan results and final thoughts.
Hands On With The Mole 3D Scanner, Part 2
Our look at the new Mole 3D scanner continues with operations and alignment.
Hands On With The Mole 3D Scanner, Part 1
We’ve been quietly testing the new Mole 3D scanner for a few weeks and have a full, hands-on review.
Hands On With The LulzBot TAZ Sidekick 3D Printer, Part 3
Our hands on review of the LulzBot Sidekick 747 3D printer ends with a look at software, print results and final thoughts.
Hands On With The LulzBot TAZ Sidekick 3D Printer, Part 2
Our hands on review of the LulzBot Sidekick 747 3D printer continues with a look at setup, calibration and operations .
Hands On With The LulzBot TAZ Sidekick 3D Printer, Part 1
We’ve been testing a LulzBot Sidekick 747 3D printer for the last few months.
Hands On With Carima CMYK Non-Toxic 3D Printer Resin, Part 2
Our review of Carina’s CMYK resins continues with print results and final thoughts.
Hands On With Carima CMYK Non-Toxic 3D Printer Resin, Part 1
We were provided the opportunity to test Carima’s CMYK non-toxic 3D printer resin.
Hands On With The Anycubic M3 Premium 3D Printer, Part 3
Our review of the new Anycubic M3 Premium resin 3D printer wraps ups with a look at software, print quality and final thoughts.
Hands On With The Anycubic M3 Premium 3D Printer, Part 2
Our review of the new Anycubic M3 Premium resin 3D printer continues with a look at setup, calibration, and software.
Hands On With The Anycubic M3 Premium 3D Printer, Part 1
Our lab was busy taking a close look at the new Anycubic M3 Premium resin 3D printer.
Hands On With Our Hands-On 3D Printing Reviews, 2022 Edition
An update to our comprehensive list of our hands on equipment, software and material reviews.
Hands on with the Luma NeRF 3D Scanner App
I’ve been testing the Luma 3D scanning app, which uses the new NeRF method, and it’s amazing.
Hands on with Scanamaze
I tested Scanamaze, a new handheld 3D scanning app.
Hands On With The Kingroon KP5L 3D Printer, Part 3
Our look at the Kingroon KP5L 3D printer concludes with a look at software, print quality and final thoughts.
Hands On With The Kingroon KP5L 3D Printer, Part 2
Our lab test of the Kingroon KP5L continues with a look at setup, calibration and operations.
Hands On With The Kingroon KP5L 3D Printer, Part 1
Our lab has been quite busy lately, and this time we’re looking at the Kingroon KPL5 3D printer.
Hands On With a $189 3D Printer: The Anycubic Kobra Go, Part 3
Our test of the Kobra Go desktop 3D printer concludes with a look at print quality and our final thoughts.
Hands On With a $189 3D Printer: The Anycubic Kobra Go, Part 2
Our test of the Kobra Go desktop 3D printer continues with a look at Setup, calibration and operations.
Hands On With a $189 3D Printer: The Anycubic Kobra Go, Part 1
Just prior to its release, we obtained a Kobra Go 3D printer from Anycubic and gave it a good test.
Hands On With The Sovol SV01 PRO 3D Printer, Part 3
Our testing of the Sovol SV01 Pro 3D printer concludes with a look at print quality and final thoughts.
Hands On With The Sovol SV01 PRO 3D Printer, Part 2
Our testing of the Sovol SV01 Pro 3D printer continues with a look at operations.
Hands On With The Sovol SV01 PRO 3D Printer, Part 1
The Sovol SV01 Pro 3D printer spent some time in our lab being tested.
Hands On With The Anycubic D2 DLP 3D Printer, Part 3
Our test of the new Anycubic D2 DLP 3D printer concludes with a look at print results and final thoughts.
Hands On With The Anycubic D2 DLP 3D Printer, Part 2
Our test of the new Anycubic D2 DLP 3D printer continues with a look at operations and software.
Hands On With The Anycubic D2 DLP 3D Printer, Part 1
We had the opportunity to test the new Anycubic D2 DLP 3D printer.
Hands on with the MINGDA Magician X 3D Printer, Part 3
Our test of the MINGDA Magician X desktop 3D printer finishes with a look at software, print quality and final thoughts.
Hands on with the MINGDA Magician X 3D Printer, Part 2
Our look at the MINGDA Magician X desktop 3D printer continues with setup, calibration and operation.
Hands on with the MINGDA Magician X 3D Printer, Part 1
Our lab has been busy exploring the MINGDA Magician X desktop 3D printer.
Hands On With The Anycubic Kobra Plus 3D Printer, Part 3
Our review of the Anycubic Kobra Plus concludes with a look at software, print quality and final thoughts.
Hands On With The Anycubic Kobra Plus 3D Printer, Part 2
Our look at the Anycubic Kobra Plus 3D printer continues with setup, calibration and operation.
Hands On With The Anycubic Kobra Plus 3D Printer, Part 1
Anycubic’s Kobra line has a new member, the Kobra Plus.
Hands On With The Pantheon HS3 High Speed 3D Printer, Part 2
Our look at Pantheon Design’s incredible HS3 continues with operations, materials, software and our final thoughts. This is part two of a two part series, please read part one. Pantheon HS3 Operations Operating the HS3, or at least our pre-production unit, was identical to operating any Duet-equipped 3D printer. The web interface was quite detailed,… Continue reading Hands On With The Pantheon HS3 High Speed 3D Printer, Part 2
Hands On With The Pantheon HS3 High Speed 3D Printer, Part 1
We’ve just finished testing the Pantheon HS3, and wow, what a 3D printer!
Hands On With The Creality Ender-3 S1, Part 3
Our look at the Creality Ender-3 S1 desktop 3D printer ends with a look at software and final thoughts.
Hands On With The Creality Ender-3 S1, Part 2
Our look at the Creality Ender-3 S1 desktop 3D printer continues with setup, calibration and operations.
Hands On With The Creality Ender-3 S1, Part 1
We’ve been testing the Creality Ender-3 S1 desktop 3D printer.
Hands On With SuperSlicer’s Calibration Set
I’ve been playing with SuperSlicer for the past week and have some thoughts.
Hands On With The Anycubic AirPure
We gave the new Anycubic Airpure a test in our lab.
Hands On With the Anycubic M3 Plus 3D Printer, Part 3
Our review of the Anycubic Photon M3 concludes with an examination of the software environment, print quality and final thoughts.
Hands On With the Anycubic M3 Plus 3D Printer, Part 2
Our review of the Anycubic Photon M3 continues with our setup and calibration experience.
Hands On With the Anycubic M3 Plus 3D Printer, Part 1
Not long after testing the Anycubic Photon M3, we got our hands on the very different Anycubic Photon M3 Plus 3D printer.
Hands On With Scaniverse
I took a look at a Scaniverse, a very useful handheld 3D scanning app.
Hands On With The Anycubic Photon M3 3D Printer, Part 2
Our hands on test of the Anycubic Photon M3 3D printer continues, with a lot at operations, software and final thoughts.
Hands On With The Anycubic Photon M3 3D Printer, Part 1
Somehow we’ve also managed to test yet another device this week, the Anycubic Photon M3 desktop resin 3D printer.
Hands On With RealityScan, Part 2
Our evaluation of Capturing Reality’s new mobile 3D scanning app continues.
Hands On With RealityScan, Part 1
Capturing Reality released a mobile version of their powerful 3D scanning system, and we gave it a test.
Hands On with the Anycubic Kobra Desktop 3D Printer, Part 2
Our hands on review of the Anycubic Kobra desktop 3D printer continues with a look at operations, print results and conclusions.
Hands On with the Anycubic Kobra Desktop 3D Printer, Part 1
Our busy lab managed to give the Anycubic Kobra desktop 3D printer a thorough workout.
Hands On With The Creality Sermoon V1 Pro 3D Printer, Part 2
Our testing of the Creality Sermoon V1 Pro desktop 3D printer continues, with a look at operations, advanced materials and remote management.
Hands On With The Creality Sermoon V1 Pro 3D Printer, Part 1
Our lab has been very busy lately, this time testing the Creality Sermoon V1 Pro desktop 3D printer.
Hands On With The Voxelab Aquila S2 3D Printer, Part 2
Testing the Aquila S2 desktop 3D printer continues with an examination of print results.
Hands On With The Voxelab Aquila S2 3D Printer, Part 1
Our lab has been quite busy lately, and this time we’re reviewing the Voxelab Aquila S2 desktop 3D printer.
Hands On With The Anycubic Photon Mono X 6K 3D Printer, Part 3
We extensively tested the Anycubic Photon Mono X 6K 3D printer and the matching Wash and Cure Plus Machine. Here we discuss software and wrap up.
Hands On With The Anycubic Photon Mono X 6K 3D Printer, Part 2
Our testing of the Anycubic Photon Mono X 6K 3D printer continues with a review of operations and post processing.
Hands On With The Anycubic Photon Mono X 6K 3D Printer, Part 1
We’ve just completed several weeks of testing of Anycubic’s new Photon Mono X 6K resin 3D printer.
Hands On With The Voxelab Aries 3D Printer, Part 2
Our look at the new Voxelab Aries desktop 3D printer continues with the setup and operation.
Hands On With The Voxelab Aries 3D Printer, Part 1
Our test lab has been quite busy lately. This time we reviewed the Voxelab Aries desktop 3D printer.
Hands On With The Voxelab Aquila X2 Desktop 3D Printer, Part 2
My testing of the Voxelab Aquila X2 desktop 3D printer continues.
Hands On With The Voxelab Aquila X2 Desktop 3D Printer, Part 1
I had a chance to assemble and test Voxelab’s new Aquila X2 desktop 3D printer.
Hands On With The Artec Leo 3D Scanner, Part 3
Artec 3D provided us with a Leo 3D scanner, so we put it through some tests. Here we review several sample 3D scans taken with the device.
Hands On With The Artec Leo 3D Scanner, Part 2
Artec 3D provided us with a Leo 3D scanner, so we put it through some tests. We examine the operation of the device.
Hands On With The Artec Leo 3D Scanner, Part 1
Artec 3D provided us with a Leo 3D scanner, so we put it through some tests. First let’s look at features and setup.
Hands On With The Anycubic Vyper 3D Printer, Part 3
I had the opportunity to test out the new Vyper 3D printer from Anycubic in our lab: print results.
Hands On With The Anycubic Vyper 3D Printer, Part 2
I had the opportunity to test out the new Vyper 3D printer from Anycubic in our lab: setup and printing.
Hands On With The Anycubic Vyper 3D Printer, Part 1
I had the opportunity to test out the new Vyper 3D printer from Anycubic in our lab: features and unpacking.
Hands-On With Apple’s New Object Capture
We managed to do an initial test of Apple’s new Object Capture feature.
Hands On With The Creality LD-006, Part Three: Results And Final Thoughts
I had a chance to try out the Creality LD-006 desktop 3D printer. In this post we look at post-processing the prints and wrap up the series.
Hands On With The Creality LD-006, Part Two: Setup And Operation
I had a chance to try out the Creality LD-006 desktop 3D printer. In this post we look at setting up and operating the machine.
Hands On With The Creality LD-006, Part One: Unboxing
I had a chance to try out the Creality LD-006 desktop 3D printer. In this post we look at the machine’s description and unboxing.
Hands On With Our Hands-On 3D Printing Reviews
Did you know we’ve published dozens of product reviews? Here’s a list of all 80+ of them, at least up to today.
Hands On With The Formlabs Form 3 3D Printer, Part 2
I had the chance to put together a Formlabs Form 3 SLA 3D printer and found the device a great improvement over the Form 2.
Hands On With The Formlabs Form 3 3D Printer, Part 1
I had the chance to put together a Formlabs Form 3 SLA 3D printer and found the device a great improvement over the Form 2.
Hands On With PLA-F, An ABS & PLA Blend
I heard about a new 3D printer filament with an unlikely combination of materials: PLA and ABS.
Hands On With The Calibry 3D Scanner, Part 2
Hands on with the Calibry handheld 3D scanner. In this part we’ll look at the operations of the Calibry handheld 3D scanner.
Hands On With Two More Fiberlogy Filaments
We examine two more filament materials from Fiberlogy, another PLA and a PET-G, and made some surprising discoveries.
Hands On With Two Fiberlogy Filaments
We tested two types of 3D printer filament from Fiberlogy and found some very interesting results.
Hands On With The Prusa MMU2S, Part 3
We tested the Prusa Research MMU2S multi-material 3D printer upgrade kit and learned a great deal about 3D printing. Part 3 deals with troubleshooting and eventual success.
Hands On With The Prusa MMU2S, Part 2
We tested the Prusa Research MMU2S multi-material 3D printer upgrade kit and learned a great deal about 3D printing. Part 2 deals with assembly and initial testing.
Hands On With The Prusa MMU2S, Part 1
We tested the Prusa Research MMU2S multi-material 3D printer upgrade kit and learned a great deal about 3D printing. Part 1 deals with concepts and assembly.
Hands On With The ANET ET4 3D Printer: Part 3
Part 3 of our hands on review test of the new ANET ET4 3D printer kit, covering software, advanced 3D printing operations and our conclusion.
Hands On With The ANET ET4 3D Printer: Part 2
Part 2 of our hands on review test of the new ANET ET4 3D printer kit, covering features and basic 3D printing operations.
Hands On With The ANET ET4 3D Printer: Part 1
Part 1 of our hands on review test of the new ANET ET4 3D printer kit, covering unboxing and assembly steps.