There’s a major update to the non-planar fuzzy skin script.
gcode
Stich3R: New Blender Add-On Brings Realistic GCODE Visualization
There’s a new and quite beautiful rendering system for GCODE visualization. When you prepare a 3D print in slicing software, there’s usually a 3D viewable preview. It’s quite important to review the preview, because it can often show flaws in the job — does the first layer actually touch all of the plate? Did you… Continue reading Stich3R: New Blender Add-On Brings Realistic GCODE Visualization
Five Things that need to be Standardized in 3D Printing
The world of 3D printing seems to be slowly fragmenting into a series of closed environments. What can stop that from happening?
Slice-100K: How a New Dataset Could Revolutionize AI in 3D Printing
Researchers have developed “Slice-100K”, a dataset that could enable much more AI use in 3D printing.
Anycubic Quickly Resolves Security Incident Involving Unexpected GCODE File on 3D Printers
Anycubic seems to have resolved a curious security incident with their 3D printers.
ChatGPT and 3D Printing: A Look into MakeUseOf’s Findings
I’m reading a curious article on MakeUseOf that attempts to show how ChatGPT can be used for 3D printing.
Book of the Week: Advanced 3D Printing with Grasshopper
This week’s selection is “Advanced 3D Printing with Grasshopper” by Diego Garcia Cuevas and Gianluca Pugliese.
Markforged Links Slicing and Simulation
Markforged announced a very useful new feature for their Eiger software platform.
Speeding Up 3D Printing With Ulendo
We had a chat with Ulendo, developers of an intriguing system to dramatically speed up 3D printing.
Could OVF Replace GCODE?
A newly invented protocol just might replace GCODE for certain types of 3D printing.
Book of the Week: Advanced 3D Printing with Grasshopper
This week’s selection is “Advanced 3D Printing with Grasshopper” by D. Diego Garcia Cuevas and D. Gianluca Pugliese.
Design of the Week: Mini 3D Printed Hammock
This week’s selection is the questionably useful, but totally admirable Mini 3D Printed Hammock by Instructables contributor jayleenli.
Should Premade GCODE Be Used?
I’ve seen pre-made GCODE a few times recently, and I am a bit suspicious of it.
Why Use a Free GCODE Analyzer?
There are tons of free utilities available on the internets, and one of them is a free GCODE viewer.
Printr Simplifies Start and End 3D Print Sequences
I hadn’t noticed this previously, but Printr has developed a really cool way to customize portions of your desktop 3D prints.
MakePrintable’s GCODE Feature Could Cause Issues For Some
Another MakePrintable story? Yes, because they’ve developed a feature that could shake things up in the intellectual property space.