Charles R. Goulding and Preeti Sulibhavi drill into Baker Hughes’ transformative use of 3D printing, highlighting its strategic partnerships and impact on the energy sector.
future
Bambu Lab Teases Multicolor 3D Printer and Plans for Larger Devices in Recent AMA
Bambu Lab took to Reddit to perform an “Ask Me Anything” session. Did they reveal anything of interest?
Sensors and AI: The Next Frontier in Enhancing 3D Printing Technology
I’ve thinking a lot lately about sensors on 3D printers.
What Will the 3D Printing Industry Look Like in Ten Years?
Consolidation, innovation and the drive toward production-ready additive manufacturing could bring another order-of-magnitude change in the industry over the next decade.
Food 3D Printing: Why It’s Not in Our Kitchens Yet
We’ve all wondered about food 3D printing and why we don’t really have it in our kitchens, but there’s more to the story.
Book of the Week: Futureproof: 9 Rules for Surviving in the Age of AI
This week’s selection is “Futureproof: 9 Rules for Surviving in the Age of AI” by Kevin Roose.
Beyond 3D Printed Houses
An exclusive interview with COBOD founder Henrik Lund-Nielsen about driving construction 3D printing innovation in infrastructures.
Zero-Emission Steel Production: How Can Additive Manufacturing Assist?
A research paper on a future zero-emission steel future has implications for additive manufacturing.
Book of the Week: Dancing With Robots
This week’s selection is “Dancing With Robots: The 29 Strategies for Success In the Age of AI and Automation” by Bill Bishop.
Book of the Week: Soonish: Ten Emerging Technologies That’ll Improve and/or Ruin Everything
This week’s selection is “Soonish: Ten Emerging Technologies That’ll Improve and/or Ruin Everything” by Kelly Weinersmith and Zach Weinersmith.
The Five Great Challenges Additive Manufacturing Must Overcome
What are the remaining barriers to mass use of additive manufacturing?
Book of the Week: The Future Is Faster Than You Think
This week’s selection is “The Future Is Faster Than You Think” by Peter Diamandis and Steven Kotler.
2021: The Year Of Additive Manufacturing Market Consolidation?
It’s only January, but 2021 already shows an overarching theme in 3D printing: market consolidation.
2021 Predictions For 3D Printing
Charles R. Goulding and Preeti Sulibhavi look ahead to a new year in 3D printing with nine predictions of what’s to come in 2021.
How Could Additive Manufacturing Replace Traditional Manufacturing?
I’m reading a piece on Shapeways’ blog entitled “Will Additive Manufacturing Replace Conventional Manufacturing?” and have some thoughts.
The Future of Additive Manufacturing
An interesting talk at the third episode of the ongoing 3DEXPERIENCE: A Virtual Journey revealed some hints about what may happen in additive manufacturing’s future.
Is this The Time For The 3D Printing Industry To Double Down?
Charles R. Goulding considers the path forward for 3D printing in the time of big tech.
The 3D Printing Market Will Exceed US$50B By 2026: So What?
Fortune Business Insights predicts a massive growth in the 3D printing market by 2026. We have some thoughts on what that means for existing and new 3D printing ventures.
Slow Sculpture: Is 3D Printing Really Creating The Future?
Is 3D printing technology helping us sneak through the 21st century without much notice? Will we be surprised when we suddenly find ourselves in flying cars?
Book of the Week: The Inevitable
This week’s selection is “The Inevitable” by futurist Kevin Kelly.
National Manufacturing Day 2019: Expert Roundtable On “Additive Manufacturing: The Next Frontier”
It’s National Manufacturing Day, perfect for a meeting of the minds to discuss additive manufacturing.
Exclusive Interview: Essentium CEO On Innovation, Future Of Industrial-Scale Manufacturing — Part 1
It’s been a tumultuous time for Texas-based Essentium lately; we catch up with the CEO for an exclusive chat about the state of things.
Five Impactful 3D Printing Innovations
Let’s take a look at a few of the most impressive 3D printing innovations of the last five years and see how much the industry has changed since it began.
How 3D Printing Can Take On the Sustainability Challenges of Tomorrow
Earth Day presents a moment in time for reflection, to take a deeper look at how we are treating the planet and what sort of changes we want to make to better preserve our resources for future generations.
Metal 3D Printing Always Playing Catch Up
Metal 3D printing has come a vast distance since it was first introduced some years ago.
About That Rize Investment by Dassault Systèmes…
There’s something very intriguing about Dassault Systèmes’ surprise participation in a US15M investment in Rize.
A Look at Theoretical Futures for 3D Printing Technology
A speculative video discusses some of the issues 3D printing may face in the distant future.
Book of the Week: Designing Reality
This week’s selection is “Designing Reality: How to Survive and Thrive in the Third Digital Revolution” by Neil Gershenfeld, Alan Gershenfeld and Joel Cutcher-Gershenfeld.
What Construction 3D Printing Must Do Next
After reading yet another wildly exaggerated story about 3D construction printing, I thought I’d make a list of things to do.
Six 3D Printing Things To Watch For in 2017
Yes, it’s the beginning of a new year and I had some thoughts on what might happen.