printer Archives « Page 5 of 24

Learn About One Click Metal’s Affordable and Easy-to-Use Metal 3D Printer

I spoke with the folks from One Click Metal and learned quite a bit about their mid-range metal 3D printer.

Get to Know the MSLA and SLA Combination Inside Axtra3D’s Lumia 3D Printer

What’s going on inside Axtra3D’s Lumia 3D printer?

Exploring the Foamy 3D Printing Revolution: PrintFoam’s Innovative Process

PrintFoam is a unique form of 3D printing that uses, as you might guess, actual foam.

Massivit’s Cast in Motion: A Game-Changing 3D Printing Process

We had a close look at Massivit’s latest 3D print technology: CIM, or “Cast in Motion”.

MELD’s Hybrid Metal 3D Printer

MELD announced a new hybrid device to produce large metal parts.

What To Make of Wematter’s Big Deal With 3D Systems

I spoke with Wematter representatives about several things happening with the company recently.

INTAMSYS Launches Desktop High Temperature 3D Printer

INTAMSYS launched a new desktop 3D printer that can operate at high temperatures.

What Happened to the Blackbelt 3D printer? Answer: It’s Even Better

There’s an interesting tale about the Blackbelt 3D printer, the first successful belt 3D printer.

3D Printing Upside Down and Right Side Up at the Same Time with Duplex 3D

Duplex 3D has produced what could be one of the strangest — and fastest — FFF 3D printers on the market.

Q.BIG 3D’s Big 3D Printer Has a Surprising Feature

We had a quick look at Q.BIG 3D’s new QUEEN 1 3D printer.

Hands On With The Anycubic M3 Premium 3D Printer, Part 3

Our review of the new Anycubic M3 Premium resin 3D printer wraps ups with a look at software, print quality and final thoughts.

Hands On With The Anycubic M3 Premium 3D Printer, Part 2

Our review of the new Anycubic M3 Premium resin 3D printer continues with a look at setup, calibration, and software.

Hands On With The Anycubic M3 Premium 3D Printer, Part 1

Our lab was busy taking a close look at the new Anycubic M3 Premium resin 3D printer.

Metal Parts By Lunchtime: Foundry Lab’s Unique Metal Casting Technology

Foundry Lab has developed an extremely rapid process for producing strong metal parts in many different materials.

Freemelt’s Unusual New Metal 3D Printer Features

We had a look at Freemelt’s latest innovations in metal 3D printing.

NPPower’s New Malachite Metal 3D Printer

NPPower revealed their new small-format metal 3D printer, the Malachite.

Why Stratasys Showed a Robotic System They Don’t Even Sell

At Formnext 2022, Stratasys featured a product they don’t even sell.

Affordable Metal 3D Printing From SinterJet

Sinterjet launched a new and inexpensive metal 3D printing system, the M60.

A Startup Company is 3D Printing Liquid Aluminum

A startup seems to have developed a way to 3D print liquid aluminum.

The SYGLASS2 Glass 3D Printer Can Do Something Amazing

After looking at the SYGLASS2 3D printer from Sygnis, I am astonished at what it can 3D print: kilometers of optical fiber.

The SEAMHex 3D Printer Overcomes Pellet Problems

We had a look at the very unusual METROM SEAMHex 3D printer.

There’s An Even Bigger NXG XII

SLM Solutions announced the NXG XII 600E, an even bigger version of the company’s massive metal 3D printer.

Creality Announces Dramatic Price Reductions: US$99 3D Printers

Creality announced a series of dramatic price discounts on 3D printers for their Black Friday sale period, some of which are unprecedented in the industry.

Lynxter’s Silicone 3D Printer Has an Important Surprise

Lynxter announced a new 3D printer dedicated to silicone material.

Largix’s Unusual 3D Printing Process

An Israeli company uses an unusual 3D printing process to make large-scale objects.

AON3D’s New M2+ High Temperature 3D Printer

AON3D has a new M2+ 3D printer.

Axtra3D’s X1 Series 3D Printers Launch

Axtra3D announced their new X1 series of 3D printers that use the company’s highly unusual HPS 3D printing process.

Creality Announces Ender-5 S1 Desktop 3D Printer

Creality announced a significant upgrade to their Ender series, with the new Ender-5 S1 3D printer.

miniFactory Announces Ultra 2 High Temperature Production 3D Printer

BMF Announces High Throughput Micro-Precision 3D Printer

Boston Micro Fabrication (BMF) announced a new 3D printer, the microArch S350.

EPlus3D Announces Massive Metal 3D Printer

EPLUS 3D announced the availability of a massive metal 3D printer, the EP-M1250.

Voxelab Announces High-Speed, High-Temperature Desktop 3D Printer

Voxelab announced the Aquila D1, a much more powerful FFF desktop 3D printer.

Anycubic’s new Photon M3 Premium 3D Printer

Anycubic announced a new and rather large MSLA 3D printer, the Photon M3 Premium that has a unique and powerful light engine.

SPEE3D Announces “XSPEE3D”

SPEE3D announced a new mobile metal additive manufacturing platform, XSPEE3D.

Snapmaker Announces IDEX 3D Printer

Snapmaker announced a new and advanced dual extrusion 3D printer, the Snapmaker J1.

Axtra’s HPS Combines SLA and DLP Resin 3D Printing

Startup company Axtra has developed an unusual hybrid 3D printing process they call “Hybrid Photosynthesis”, or “HPS”.

Followup: There IS a Carbon Fiber 3D Printer After All

Earlier we published a thought piece on the notion of using carbon fiber rods for 3D printer frames.

GE Additive Announces Revolutionary Binder Jet Factory System

GE Additive announced the Series 3D binder jet metal 3D printer system yesterday, and it could be a revelation for manufacturers.

Raplas Offers a Wide Selection of Production 3D Printers

Raplas has a broad product set including both resin and powder-based 3D printers.

UltiMaker Announces First 3D Printer: The MakerBot SKETCH Large

The new UltiMaker just announced their first product: MakerBot SKETCH Large.

HALOT-ONE Resin 3D Printers Significantly Discounted

This could be a good time to consider purchasing a HALOT 3D printer from Creality.

Open Source 5-Axis 3D Printer Project Grows Interest

An open source version of a five-axis 3D printer design is being developed, and could soon take off.

nano3Dprint launches B3300 Dual-Dispensing 3D Printer

The new B3300 is the latest electronics 3D printer from nano3Dprint.

SUN METALON’s 3D Printer To Produce Its Own Material from Rocks?

A Japanese startup claims to be developing a machine that can make its own materials.

Eight Certain Signs a 3D Printer is Crap

Is there an easy way to tell whether a 3D printer is not for you? Yes, there are several.

Hands On With The Kingroon KP5L 3D Printer, Part 3

Our look at the Kingroon KP5L 3D printer concludes with a look at software, print quality and final thoughts.

Hands On With The Kingroon KP5L 3D Printer, Part 2

Our lab test of the Kingroon KP5L continues with a look at setup, calibration and operations.

Hands On With The Kingroon KP5L 3D Printer, Part 1

Our lab has been quite busy lately, and this time we’re looking at the Kingroon KPL5 3D printer.

Hands On With a $189 3D Printer: The Anycubic Kobra Go, Part 3

Our test of the Kobra Go desktop 3D printer concludes with a look at print quality and our final thoughts.

Hands On With a $189 3D Printer: The Anycubic Kobra Go, Part 2

Our test of the Kobra Go desktop 3D printer continues with a look at Setup, calibration and operations.

Hands On With a $189 3D Printer: The Anycubic Kobra Go, Part 1

Just prior to its release, we obtained a Kobra Go 3D printer from Anycubic and gave it a good test.

A FRESH Take on Liquid Possibilities in 3D Printing

FluidForm’s FRESH technologies may offer a solution to 3D printing challenging materials such as collagen and silicone.

SLM Solutions To Build World’s Largest Metal 3D Printer

SLM Solutions is the major contractor on a project set to build what should be the largest 3D printer ever.

The Zortrax Inkspire 2 Resin 3D Printing System

Zortrax announced a new suite for resin 3D printing, focused on the new Inkspire 2.

The SunLu Terminator3 3D Printer

Sunlu announced a new desktop 3D printer that could be among the fastest in its class.

Meltio Partnership Creates Robotic 3D Printer

Melito has partnered with Ziknes to develop a robotic metal 3D printer.

Xact Metal Introduces XM300G Metal 3D Printer Series

Xact Metal announced the XM300G metal 3D printer series.

Mantle Releases 3D Printers

Mantle announced the availability of their first 3D printers.

Therwood’s LSAM is Really Large Scale

If you’re looking for a large scale 3D printer, look no further than Thermwood.

Hands On With The Sovol SV01 PRO 3D Printer, Part 3

Our testing of the Sovol SV01 Pro 3D printer concludes with a look at print quality and final thoughts.

Hands On With The Sovol SV01 PRO 3D Printer, Part 2

Our testing of the Sovol SV01 Pro 3D printer continues with a look at operations.

Hands On With The Sovol SV01 PRO 3D Printer, Part 1

The Sovol SV01 Pro 3D printer spent some time in our lab being tested.

Anycubic Releases Details on the New MicroLED 3D Printer

Anycubic released a pile of details for their tiny MicroLED 3D printer, which uses a very different light engine.

Anycubic Announces 3D Printer Under $200, and More

Anycubic announced two new 3D printers, including one that is to be priced at under US$200.

Hands On With The Anycubic D2 DLP 3D Printer, Part 3

Our test of the new Anycubic D2 DLP 3D printer concludes with a look at print results and final thoughts.

Hands On With The Anycubic D2 DLP 3D Printer, Part 2

Our test of the new Anycubic D2 DLP 3D printer continues with a look at operations and software.

Hands On With The Anycubic D2 DLP 3D Printer, Part 1

We had the opportunity to test the new Anycubic D2 DLP 3D printer.

Sorting Through Creality’s Current Ender-3 3D Printer Series

Creality now offers no less than six different Ender-3 3D printer models, and choosing between them can be challenging.

Markforged’s Aerospace Grade 3D Printer: FX20

Markforged’s FX20 3D printer is quite impressive.

Lynxter Continues 3D Print Commercialization

I had a chat with the folks from Lynxter to find out what they’ve been up to.

New 3D Printer Under Development: Alchemical-3D

A new open source 3D printer development project has launched, and they’re looking for contributors.

This Company Is Shaking Up Additive Manufacturing with Ultrasonics

What’s different about Fabrisonic’s patented UAM technology? 3D printing is entering its fourth decade, with a lot of new technologies being developed along the way. Currently, the most popular among them is fused deposition modeling (FDM)—also known as fused filament fabrication (FFF)—a quick and cost-effective method for producing physical models. However, FDM results in parts that… Continue reading This Company Is Shaking Up Additive Manufacturing with Ultrasonics