Charles R. Goulding and Preeti Sulibhavi examine how a drainage company could make use of 3D printing technology.
news
Could Desktop Resin 3D Printing be Affected by Regulations in the Future?
There could be a massive problem for desktop resin 3D Printing in the future.
Exploring Beyond the Box: Construction 3D Printing for Undersea Artificial Reefs
Almost all the buzz about construction 3D printing is about “printing homes”, but there’s more to the story.
Understanding the Growing Demand for Everyday Materials in 3D Printing
I had an interesting conversation with AddiFab recently, and it pointed out what might be a new trend in 3D printing.
Crafting with Cricut Maker and 3D Printers: Exploring the Possibilities
Charles R. Goulding and Preeti Sulibhavi propose that a Cricut Maker could lead to increased interest in 3D printing, and personal fabrication in general.
Introducing AiSync: Ai Build’s Text-to-Slice Interface for Additive Manufacturing
Ai Build has introduced something quite amazing: AiSync.
Researching Unusual Materials? Try the Sygnis F-NIS 23151 3D Printer
Sygnis’ F-NIS 23151 is a very unusual 3D printer, and not just because of its cryptic name.
Haddy: The New 3D Printed Furniture Startup
A new 3D print-based furniture venture has launched: Haddy.
Can Your 3D Printed Artwork Last 52,000 Years?
Researchers have analyzed the long-term durability of the most commonly 3D printed materials, PLA and ABS.
MX3D: From Early Development to the Production Stage
What’s up with MX3D? We had a chat with them.
Examining 3D Printer Prices: Are They Increasing or Decreasing?
Are 3D printer prices rising or falling? It’s not an easy question to answer.
Design of the Week: Denture Bit Holder
This week’s selection is the fascinating Denture Bit Holder With Magnets by Printables contributor iplop.
Who’s The Biggest In 3D Printing, January 15, 2023
Once again we take a look at the valuations of the major 3D printing companies over the past week.
What to Expect from 3D Printing in 2023: Charles R. Goulding and Valentina Alzate’s Predictions
Charles R. Goulding and Valentina Alzate have some thoughts about what might transpire in the world of 3D printing in 2023.
Question of the Week: 3D Printing a Zinc House Ornament
This week’s question is all about how to 3D print an enormous metal house ornament.
Essentium’s HSE 240 HT: The Easy-to-Install High Temperature 3D Printer
Essentium expects to launch a new high temperature 3D printer later this year, but there’s an interesting difference with this device.
Leveraging 3D Printing with Johnson & Johnson’s Acquisition of Abiomed
Charles R. Goulding and Preeti Sulibhavi suggest increased use of 3D printing Johnson & Johnson.
3D Scanning for Everyone? Not Yet
Polycam falls short in reality capture of detailed parts.
Don’t Miss Out: Learn from Industry Experts at the TIPE Conference
In its 3rd year, more than 2,000 attendees are anticipated to be part of the free, premier virtual additive manufacturing event of the year!
Innovative 3D Printing Method Uses Liquid in Liquid Medium
Researchers from the University of Calgary have developed a “liquid in liquid” 3D printing material.
What CASTOR’s Report Reveals About 3D Printed Part Sustainability
CASTOR has released a report on 3D printed part sustainability, and it has some interesting reveals.
3D Printing for Esports: Improving Performance and Health
Charles R. Goulding and Warren Buzzell look at the innovations in 3D printing that have assisted esports.
BeeHex Is Developing a Way to 3D Print Food From Plastic
We haven’t written about BeeHex for quite some time, but it turns out they’ve been developing an unusual food 3D printing technology involving plastics.
New Research Paper Explores 3D Printing Copper and Steel Within the Same Job
A new research paper describes a method of 3D printing copper and steel within the same job.
CEAD Builds 36 Meter Long Mega II 3D Printer for Al Seer Marine
The multi-robot rail system is now the largest polymer 3D printer in the world
Enhance Quality Control and Inventory Management with Replique’s RSure
Replique doesn’t make 3D printers, but they do make software that helps use them in a much more sophisticated manner.
An Immigrant’s Dream: Thomas Zacharia’s 35 Years at ORNL
Charles R. Goulding and Preeti Sulibhavi look at a change at ORNL.
Anisoprint: Adapting and Overcoming Challenges to Deliver Continuous Carbon Fiber 3D Printing
Anisoprint continues to grow through a series of challenges.
Overcoming Outgassing and Weight Challenges with 3D Printing for Space Applications
If you think 3D printing mechanical parts is tricky, try making parts for space applications.
Learn How Tecnica’s HDLS 3D Printing System Delivers IT Grade 13 Accuracy
We’ve learned more about Tecnica’s upcoming powder-sintering 3D printer that is very different from existing SLS technology.
What to Consider When Choosing a 3D Printer Nozzle
What are the properties of 3D printer nozzles, and what do they mean?
WAGO Adopts Innovative 3D Print Strategy for their Electronics Business
WAGO has adopted a fascinating 3D print strategy for their electronics business.
Thought 3D Expands Capabilities of Drywise In-line Filament Storage System
Thought 3D has been expanding the capabilities of their Drywise system.
Design of the Week: Print-in-Place Armored Vehicle
This week’s selection is the Print-in-Place Armored Vehicle by Matthew of Whopper Printing.
Who’s The Biggest In 3D Printing, January 8, 2023
Once again we take a look at the valuations of the major 3D printing companies over the past week.
Exploring the Role of 3D Printing and Robotics in Japan’s Manufacturing Industry
Charles R. Goulding and Preeti Sulibhavi look at the incredible developments in 3D printing and robotics that have taken place in Japan.
Prusa Research Nears Release of the Original Prusa XL 3D Printer
Prusa Research is nearing release of their critical Original Prusa XL 3D printer, and it’s a critical step for the Czech company.
Introducing SprutCAM P3D: The 3D Slicer for Robotic Systems
SprutCAM’s P3D slicer offers full robotic 6-axis slicing of 3D models.
How Can 3D Printing Help Ukraine’s Railways?
Charles R. Goulding and Preeti Sulibhavi examine how several 3D print technologies and companies could aid the efforts in Ukraine.
Predators Behind Bars: A Story of Bicycle Aerodynamics and Manufacturing
Predator Cycling introduces carbon fiber custom fitted bicycle bar extensions.
Revolutionary Centrifugal Manufacturing Process for 3D Printing Resin
Researchers have developed a new way to 3D print resin in multiple materials using centrifugal force.
Understanding the Diverse Markets of 3D Printing: Why Some Products Don’t Make Sense
I’ve noticed a troubling trend in 3D printing in recent times: unwarranted criticism of alternative technologies, but there’s a reason why it’s happening.
Yizumi’s SpaceA: A Robotic 3D Printer For Continuous Production of Polymer Parts
Yizumi’s SpaceA industrial 3D printer combines several technologies into an interesting package.
Aidro’s Digital Lab Supplies 3D Printed Parts to Leonardo Helicopters
Charles R. Goulding and Preeti Sulibhavi see much 3D printing from a new US military contract.
SmartZavod Takes on a Lifesaving Mission in the Midst of War
A 3D print entrepreneur faces huge challenges in Ukraine, and has launched an important initiative.
Formlabs Introduces Automation Ecosystem for 3D Printing
Formlabs today announced an automated manufacturing system that leverages their 3D print technology.
A Look at the UP600 3D Printer from Tiertime: Features, Benefits, and More
We had a look at Tiertime’s biggest 3D printer, the UP600.
Caracol’s All-Encompassing Offering Makes LFAM Easier Than Ever Before
Caracol’s offering makes LFAM easier than ever with the introduction of two new major innovations – the High Flow Extruder and the Automatic Printing Bed.
How 3D Printing Is Helping Ukraine Rebuild Its Power Infrastructure
Charles R. Goulding and Preeti Sulibhavi look at several companies that could use 3D printing to assist reconstruction in Ukraine.
RePPA: A Game Changer for Resin 3D Printer Post-Processing and IPA Recycling
A company has launched an accessory to post process resin 3D prints and recycle the solvent!
META Acquires Luxexcel: What Does This Mean for 3D Printing?
META recently purchased a well-known 3D print company, Luxexcel. What does this mean?
What Happened to the Huge 3D Printer Presence at CES?
Who’s going to CES 2023? We’re not.
My Anti-Predictions for 2023: What Won’t Happen in the Coming Year
It’s the beginning of a new year, and it’s time for predictions. Anti-predictions, actually.
Meet Ermaksan: Turkey’s Innovative 3D Printer Manufacturer
Ermaksan is a 3D printer manufacturer you may not have heard of previously.
Design of the Week: Titanium Bike Handlebars
This week’s selection are the incredible titanium 3D printed bike handlebars by MYTHOS.
Who’s The Biggest In 3D Printing, January 1, 2023
Once again we take a look at the valuations of the major 3D printing companies over the past week.
2022: A Look At The Top 10 3D Printing Developments
Charles R. Goulding and Valentina Alzate countdown their top ten 3D print developments for 2022.
Thoughts on 3D Printing In 2022
At the close of the year, it’s time to reflect on what just happened.
New AM Materials Round Up, December 30, 2022
Several new AM materials were announced in past weeks.
Create Unique Avatar Merchandise with 3D Printing Technology
Charles R. Goulding and Preeti Sulibhavi propose some 3D printing for the Avatar franchise.
Big Deal: Hexagon Gives Czinger Supercar a $100 Million Turbo Boost
Divergent Technology gets an investment from Hexagon AB.
Hands On With Carima CMYK Non-Toxic 3D Printer Resin, Part 2
Our review of Carina’s CMYK resins continues with print results and final thoughts.
Hands On With Carima CMYK Non-Toxic 3D Printer Resin, Part 1
We were provided the opportunity to test Carima’s CMYK non-toxic 3D printer resin.
Exploring the Unique 3D Printable Materials Developed by Fortify
Fortify has been developing new and quite interesting 3D printable materials.
How Volkswagen is Utilizing 3D Printing to Combat Supply Chain Disruptions Caused by China Lockdowns
Charles R. Goulding and Preeti Sulibhavi examine the reaction of automakers in China during the recent crisis.
Fabbaloo Is Now On Mastodon
We’re now on Mastodon!
Unlocking Stronger Parts with BCN3D’s Revolutionary VLM Process
3D printed outsole by BCN3D’s VLM process [Source: Fabbaloo]
Benefits of Having a 3D Printer for Your Home
It might not feel like long ago when 3D printers were only accessible to big corporations, tech teams, or people with enormous amounts of money.
Exploring Qatar University’s 3D Printing Solutions for the 2022 FIFA World Cup
Charles R. Goulding and Preeti Sulibhavi reveal the way 3D print tech was used to help create this year’s World Cup stadiums.
Hands On With Simplify3D V5.0, Part 2
We complete our review of Simplify3D V5.0 with a look at previews, features, bugs and final thoughts.
Hands On With Simplify3D V5.0, Part 1
After a wait of several years, we’ve got our hands on the latest version of Simplify3D.
Unforeseen Delays: COVID-19 Disrupts China-based 3D Print Companies
China-based 3D print companies are being hit hard by COVID-19.
Design of the Week: 3D Printable Snow Chains
This week’s selection is the Universal 3D Printable Snow Chain by SpeziLover.
Who’s The Biggest In 3D Printing, December 25, 2022
Once again we take a look at the valuations of the major 3D printing companies over the past week.
Big Opportunities for Smaller 3D Printing Companies Amid Recent Mass Layoffs
Charles R. Goulding and Preeti Sulibhavi look at the good and bad news of recent corporate restructuring activities.
Get Your Copy of Women in 3D Printing’s 2022 “Diversity for Additive Manufacturing” Report
Women in 3D Printing released their annual “Diversity for Additive Manufacturing” report earlier this month.
Exploring the Admaflex 130: Admatec’s Latest Ceramic 3D Printer
I spoke with Admatec about their latest 3D printer, the Admaflex 130.
BP, ExxonMobil & Shell Investing in Biogas Production Powered by 3D Printing
Charles R. Goulding and Matthew Selman look at usage of 3D printing by several major oil & gas companies.
Dashed Dreams: What Happened to Fast Radius?
A 3D printing hub with dreams of push button manufacturing ends up in a fire sale.
Generating 3D Models from Simple Text Prompts: OpenAI’s Point-E System
Things are moving very quickly in the text to 3D model AI space.
Loop 3D’s Pro X+ 3D Printer: Automated Filament Handling for Low-Volume Production
I had a look at Loop 3D’s new Loop Pro X+ 3D printer.
Exploring the Messy Reality of Construction 3D Printing: A New Video
A new video show the challenges and successes of working with construction 3D printers.
How NJEDA’s NJ MVP Program Can Help 3D Printing Manufacturers in New Jersey
Charles R. Goulding and Preeti Sulibhavi look at a new economic development program that just launched in New Jersey.
Mango3D Introduces Lychee Slicer V5.0: FFF Printing Now Supported!
Mango3D announced V5.0 of the Lychee Slicer, but with a huge surprise: it handles FFF printing as well as resin 3D printing!
Innovative Solutions: 3D Printing Copper Atoms with Electroplating
Researchers have developed the incredible ability to 3D print copper at atomic scales.
AM-Flow Makes 3D Printing at Scale Simpler with Automation
3D printing at scale just might get a lot simpler with AM-Flow’s automation solution.
Apis Cor and SMASH: 3D Printing Affordable Housing in Miami-Dade County
Charles R. Goulding and Valentina Alzate look at the state of 3D printing in Miami.
Shocking Plot to Hide 30kg of Drugs Inside 3D Printers Revealed in Taiwan
3D printer used in smuggling operation.
Meltio Launches Software Ecosystem for Manufacturing Solutions
Meltio announced a new software ecosystem for their manufacturing solutions.
Learn About One Click Metal’s Affordable and Easy-to-Use Metal 3D Printer
I spoke with the folks from One Click Metal and learned quite a bit about their mid-range metal 3D printer.
Prusa Research Takes a Step Towards the Future of Digital Spare Parts with “Official Brand Profiles”
Prusa Research announced a new initiative to attract commercial brands to their ecosystem.
Exploring the Foamy 3D Printing Revolution: PrintFoam’s Innovative Process
PrintFoam is a unique form of 3D printing that uses, as you might guess, actual foam.
Design of the Week: Avatar Sculptures
This week’s selection are the huge Avatar sculptures produced by Gentle Giant Studios
Who’s The Biggest In 3D Printing, December 18, 2022
Once again we take a look at the valuations of the major 3D printing companies over the past week.
Unpacking the FDA’s Framework for 3D Printing at the Point of Care
Peter Saenz and Charles R. Goulding look at the progress of certified healthcare applications for 3D printing.