Event

Thirty Artists are CALMed with 3D Printing

The University of Exeter’s Centre for Additive Layer Manufacturing (CALM) recently hosted a collaboration between 30 artists and its engineers to leverage 3D printing technology.    The event was intended to introduce 3D printing technology to curious artists who expressed an interest in trying out the new approach. According to the University:     The… Continue reading Thirty Artists are CALMed with 3D Printing

Art and Sound at Euromold 2012

At trade shows vendors wish to thrill visitors by showing example prints from their machinery. Often the most impressive prints are artwork. That being so, Euromold is riddled with 3D printed artwork everywhere you look, at least in Hall 11, the home of 3D printing technologies during this year’s event. We thought you’d like to… Continue reading Art and Sound at Euromold 2012

Visit the Cube Bar!

There are many interesting things to see at Euromold if you’re into 3D printing, but perhaps the most noticeable is 3D Systems’ incredible “Cube Shop and Cafe”. Yes, it’s an actual bar, the first thing you see upon entering Hall 11, home of all 3D printing vendors at this year’s Euromold conference.    The bar’s… Continue reading Visit the Cube Bar!

Attending Euromold?

Are you visiting Euromold this week? We are! Euromold is the “World Fair for Moldmaking and Tooling, Design and Application Development”, where we’re likely to see the announcement of several new 3D printers from major manufacturers.    If you’re in Frankfurt and would like to show us something interesting or have a chat, feel free… Continue reading Attending Euromold?

3D Print Design Contest

Engineering.com has launched a four week 3D print design contest. Readers may consider entering this contest as it has few rules and a grand prize of USD$2,000.    Engineering.com will print nine winning entries on their Stratasys MOJO 3D printer and ship them directly to you.    Three winners will be announced each week, beginning… Continue reading 3D Print Design Contest

Sandy Impacts 3D Printing

Massive hurricane Sandy slammed into the east coast of the USA this week and caused a tremendous amount of damage, but how did 3D printing fare during the event?    Aside from the numerous individual “we can’t make it to work” scenarios, there has been only limited affects. We’ve seen no announcements from 3D Systems, whose… Continue reading Sandy Impacts 3D Printing

Shapeways to Open NY Factory

Popular consumer-focused 3D print service is expanding! In New York, specifically Long Island, they’re spending USD$28M to set up a 25,000sf, 50-person facility that Shapeways calls, “The Factory of The Future”.    The facility is expected to hold some 30-50 advanced 3D printers as well as providing a physical space for maker community innovation. The… Continue reading Shapeways to Open NY Factory

3D4D Challenge Claimed By WOOF

The 3D4D challenge winner was announced and it’s the University of Washington Open Object Fabricators, a.k.a. “WOOF”. They received the prize of USD$100,000 during the recent 3D Printshow in London.    Their winning entry was a method to “enable waste plastic to be used as filament for 3D printing machines, to create new products”, and… Continue reading 3D4D Challenge Claimed By WOOF

Millions To Form 1

We’ve all heard about the success of Formlab’s incredible fundraising success on the launch of their new Form 1 resin-based 3D printer, but how well did they do?    Their Kickstarter campaign has officially closed today and the results are beyond startling:  They’ve raised exactly USD$2,945,885 They’ve received orders for 1,028 Form 1 machines by… Continue reading Millions To Form 1

TCT Live – What You Missed and Why You Need to Attend

If you are looking for big ballrooms filled with paid conference attendees or a boondoggle to a resort destination, TCT Live (Birmingham, England) is not for you. This event is for both novice and experienced users that are in search of answers to the questions of what is available and what is possible. It is… Continue reading TCT Live – What You Missed and Why You Need to Attend

3D Printing Event Next Week

Don’t forget to attend the 3D Printing Event in Eindhoven, Netherlands next week if you happen to be nearby. The event now includes over 30 speakers, including representatives from a wide variety of 3D print-related companies, including: Ultimaker, GrabCAD, Shapeways, Makielab, Protospace, DUS Architects, University Medical Center Utrecht, Loughborough Design School, Stone Spray, Faberdashery and… Continue reading 3D Printing Event Next Week

Published
Categorized as Event Tagged

EuroMold Set For November

The definitive conference for 3D printing seems to be Euromold, a large manufacturing conference held in Frankfurt, Germany each November. It’s called the “World Fair for Moldmaking and Tooling, Design and Application Development”. Yes, it’s the big one.    Euromold has existed for years providing information on manufacturing, but within the over 1000 exhibitors are… Continue reading EuroMold Set For November

Popular Mechanics Likes The Cube

3D Systems’ new personal 3D printer, The Cube, has been awarded the 2012 Breakthrough Award by Popular Mechanics magazine.    This annual award is presented to a selection of innovators and inventions that the magazine believes have advanced society in some important way.    The Cube was not the only winner; other awardees included: SpaceX’s… Continue reading Popular Mechanics Likes The Cube

The 2013 Extreme Redesign 3D Printing Challenge

Each year Stratasys sponsors an excellent competition between students to determine the most interesting and useful 3D printable designs. This year they’re launching the 2013 edition of the Extreme Redesign Challenge.    The rules are very similar to previous years: submitted designs compete for scholarships and an opportunity to print out their design. Nine winners… Continue reading The 2013 Extreme Redesign 3D Printing Challenge

Smithsonian Partners with 3D Systems

In an interesting move the venerable Smithsonian Institution has partnered with 3D Systems to provide “3D printing services and technology”. 3D Systems President and CEO Abe Reichental said:   The Smithsonian has shown both foresight and technological leadership in embracing the potential of 3D printing to preserve and showcase today’s and tomorrow’s collections, making them readily… Continue reading Smithsonian Partners with 3D Systems

3D Printing Survey

We just noticed an online survey of 3D printing usage that readers may be interested in filling out.    Created by Spanish mechanical/product engineer JulioHCD, the survey is intended to assist in his research:    I have been involved in 3D print for building product models and prototypes…My interests include design inspired by nature, plastic… Continue reading 3D Printing Survey

Shapeways Gets A New Engine

Did you visit Shapeways recently? It’s different – but not different visually. Instead the techs at Shapeways have replaced the software engines running behind their website to provide various improvements, specifically in the Order Placement and Order Fulfillment functions.    Some of the improvements include:    An ability to consolidate all your Shapeways coupons into… Continue reading Shapeways Gets A New Engine

Sculpteo’s iPhone Case Design Challenge

We’re reviewing the winning entries to Sculpteo’s iPhone Case Design Challenge and we like what we see.    There are some very interesting designs, including the winner above: The String Case by FCPRS. It’s quite startling to see how inventive designers can be given the constraints of an iPhone case.    Strangely, the winning entry… Continue reading Sculpteo’s iPhone Case Design Challenge

3D Printed Weaponry Now Functional

Another first for 3D printing: A pistol constructed from 3D printed parts has been successfully fired.    The gun design was an AR-15, a “a lightweight, 5.56 mm, air-cooled, gas-operated, magazine-fed, semi-automatic rifle”, according to Wikipedia. Gun enthusiast HaveBlue selected this configuration due to its small caliber and the uncertainty of whether the 3D printed parts would withstand… Continue reading 3D Printed Weaponry Now Functional

WOOF’s 3D Printed Boat

The University of Washington’s WOOF group (Washington Open Object Fabricators) did something we haven’t seen yet: they produced a 3D printed boat that didn’t sink. In fact, it worked well enough to be entered into “Denny’s Seafair Milk Carton Derby”, a boat race.    Hold on, how do milk cartons fit into this scenario? It… Continue reading WOOF’s 3D Printed Boat

3D Printing A Canadian Cabinet Minister

During an official visit to the AssentWorks Makerspace in Winnipeg, Canadian Federal Cabinet Minister Tony Clement had his picture taken numerous times, as typically happens on such public events – but one of those images was a 3D scan.    Readers all know what happens when someone is 3D scanned: a 3D print emerges shortly… Continue reading 3D Printing A Canadian Cabinet Minister

3D Printed Design Awards In Barcelona

Barcelona’s Association of Industrial Design has selected several student projects for Student Industrial Design Awards at the Barcelona School of Design and Engineering and we had to show them to you because, well they’re amazing!    The winning entry was designed by student Marion Frei, who came up with a unique “Vinculum” system for identifying… Continue reading 3D Printed Design Awards In Barcelona

3D Printer Releases at RAPID 2012

At the SME’s RAPID 2012 conference and exposition, four new 3D printers were announced by Objet, Mcor, envisionTEC and 3D Systems. These systems cover the whole gamut: tiny 3D printers to big parts and parts in full color to parts with advanced materials. View the Video at Engineering.com

3D System’s Smarter 3D Printing

Industry giant 3D Systems intends on teaching you a lot more about 3D printing with their new seminar series entitled, “Smarter 3D Printing”. These seminars are planned for approximately 80 events in multiple locations across the United States, four locations in Canada and one (Sao Paulo) in Brazil.    The no-charge seminars will provide:   … Continue reading 3D System’s Smarter 3D Printing

A Few Cubify Developments

3D Systems’ Cube personal 3D printer has only been available for a few weeks now, but this week we noticed a few interesting developments.    First, there’s a new video out showing a bit more of how the device works. We specifically were interested in the portion where they showed how to change the filament.… Continue reading A Few Cubify Developments

3D Worms Infect The Net!

Do you use AutoCAD? If so you might be a victim of one of the most unusual cases of 3D theft we’ve seen yet.    It seems that certain AutoCAD templates have been infected with malware that does something blatantly nefarious: it sends your AutoCAD drawings to email addresses in China! What a highly efficient… Continue reading 3D Worms Infect The Net!

The 3DPrintShow In London

In London this October is the 3DPrintShow, three days of exhibitions and shows all about 3D printing.    Taking place from October 19th through the 21st, this event includes exhibits from all the major 3D print vendors and services, including MakerBot, 3D Systems, EOS, Objet, Shapeways, i.Materialise, Tinkercad, Anarkik3D, Uformia and many others. They’ll be… Continue reading The 3DPrintShow In London

The Met’s 3-D Scanning and Printing Hackathon

An interesting experiment took place at New York City’s Metropolitan Museum of Art recently, in which the Met tag-teamed with MakerBot to produce 3D art models.    A team of folks from MakerBot were invited by the Met to journey through several collections to perform 3D scans of famous artwork. The scans were then converted… Continue reading The Met’s 3-D Scanning and Printing Hackathon

Fashion and Jewelry 3D Printing Workshop

Interested in fashion or jewelry design? Want to do it with 3D printing technology? If so, you may want to attend one of the workshops taking place at ELISAVA, School of Design and Engineering of Barcelona.   There are two five-day workshops scheduled, one from 23-27 July and a second edition from 10-14 September of… Continue reading Fashion and Jewelry 3D Printing Workshop

You Can Help Makerspaces Today

Many Fabbaloo readers are members or supporters of Makerspaces – those amazing local labs offering the public the opportunity to gain low cost access to 21st century making equipment and expertise. From these establishments ideas become reality, experiments are resolved and businesses are born.    We’ve learned of a way you (yes, you) can directly… Continue reading You Can Help Makerspaces Today

More 3D Printed Fashion from Rapid 2012

We’ve received additional images and now a video of the 3D printed fashion event held at Rapid 2012 this past week from NYC-based designer Aaron Trocola, who appears here with model Abbey – and wearing one of his works.     Aaron’s exceptional video of the 3D printed fashion show runway, intermixed with shots of several… Continue reading More 3D Printed Fashion from Rapid 2012

Sculpteo’s iPhone Case Contest

3D print service Sculpteo has launched an interesting contest for those interested in designing unique cases for iPhone 4’s. They’re seeking “the best iPhone 4 case that you could ever imagine with 3D printing”. Judging will be done by a panel composed of “design and 3D printing professionals and representatives of Sculpteo”.     Specifically… Continue reading Sculpteo’s iPhone Case Contest

3D Printing Community Survey

Do you like surveys? Ok, some people don’t. But this one might be important. PeerProductions is running a survey dedicated to 3D printing and would like your input. But you’d better hurry, as it closes on May 15th.    The survey is quite short and its twenty questions requires only a few moments to complete.… Continue reading 3D Printing Community Survey

Published
Categorized as Event Tagged

Fabbaloo Visits London

It’s time for a road trip! As luck would have it, Fabbaloo will be visiting London this coming week. We’ll be hanging around the city looking for 3D printing-related stuff.    If you have something you’d like us to see on either Tuesday May 15th or Wednesday May 16th, please give us a shout right… Continue reading Fabbaloo Visits London

MakerBot Discontinues the Thing-O-Matic

Personal 3D printer manufacturer MakerBot has announced their popular Thing-O-Matic 3D printer will no longer be offered for sale. They have, of course, replaced it in their product line with the much more capable (and fully assembled) Replicator device. Today you’ll find only spare parts for the Thing-O-Matic.   The Thing-O-Matic was a breakthrough device… Continue reading MakerBot Discontinues the Thing-O-Matic

Free Autodesk Inventor Fusion for OSX and Windows

Have no money and need fancy 3D modeling software? If that’s your situation, you’re in luck: Autodesk is now offering a free preview of their Inventor Fusion 3D modeling software.    Inventor Fusion is Autodesk’s tool that unites both parametric and direct modeling approaches, hence its name, “Fusion”. The new version incorporates some very cool… Continue reading Free Autodesk Inventor Fusion for OSX and Windows

The 3D4D Challenge

There’s a new 3D printing contest about to begin, but this one is a little different. The 3D4D Challenge is focused on charity. Organized by techfortrade and sponsored by 3D printer manufacturer MakerBot and 3D printing consultants Econolyst, the contest commences on May 1st.    We can’t say much more about the 3D4D Challenge at… Continue reading The 3D4D Challenge

Extreme Redesign 2012 Winners Announced

The 2012 Extreme Redesign Contest is completed and the winners have been announced by sponsor Stratasys. Winners were selected in four categories: Middle/High School, College Engineering, Art & Architecture. Winners received USD$2500 scholarships and runners-up received scholarships of USD$1,000 each.    As usual, the winning ideas (as well as those placing second and third) were… Continue reading Extreme Redesign 2012 Winners Announced

That Cubify Van

To promote their new Cube 3D printer and Cubify 3D printing community, 3D Systems has a tricked out van shuttling around the USA. The van is equipped with Cube 3D printers and evidently a ton of 3D models, too, as they’re printing stuff at every stop. They’ve started in the western USA and are more… Continue reading That Cubify Van

3D Systems Added to S&P SmallCap 600 Index

Standard and Poors have added 3D Systems to their SmallCap 600 index. The index is a basket of (surprise) 600 companies whose aggregated stock prices offer insight into medium-sized company performance. 3D Systems was able to be added after one of the existing companies, Taleo, was acquired by Oracle (making it definitely not a Small… Continue reading 3D Systems Added to S&P SmallCap 600 Index

3D Systems Picks Up Robots, And More

Industry giant 3D Systems has made another acquisition, and this one appears to be a little different than previous purchases. They’ve acquired specialty 3D print service MyRobotNation, whom we’ve written about in the past. MyRobotNation’s specialty is, well, robots. Personalized robots.    The service provides users with a very easy to use (and fun) interface… Continue reading 3D Systems Picks Up Robots, And More

The Cube on CNN

Big media coverage for 3D Systems this week: 3D Systems CEO Abe Reichental appeared on CNN to demonstrated their new USD$1300 “Cube” personal 3D printer. Reichental explained the basics of 3D printing to the audience and said that although 3D printing has been around for decades for industrial applications, 3D Systems is now “democratizing” the… Continue reading The Cube on CNN

Open3DP is Now Open3DP

The busy folks at the University of Washington’s Solheim Additive Manufacturing Laboratory in their Mechanical Engineering Department have opened up again.    Opened up? That’s right, they were “intellectual property” closed for several weeks as their legal department imposed a rather crushing IP regime upon them. However, they’ve managed to overcome this by convincing their… Continue reading Open3DP is Now Open3DP

Extreme Redesign Finalists Announced

Stratasys sponsors the Extreme Redesign 3D Printing Challenge each year and they’ve just announced the finalists in the three categories: Art & Architecture; Middle / High School Engineering; College Engineering.    An inspection of the list shows a huge variety of entries from across the world. This challenge is not a US-only event by any… Continue reading Extreme Redesign Finalists Announced

Open3DP is Now Open3DP

The busy folks at the University of Washington’s Solheim Additive Manufacturing  Laboratory in the Mechanical Engineering Department have opened up again.    Opened up? That’s right, they were “intellectual property” closed for several weeks as their legal department imposed a rather crushing IP regime upon them. However, they’ve managed to overcome this by convincing their… Continue reading Open3DP is Now Open3DP

Scream A 3D Print, Literally

A truly amazing installation of what’s called “Production Art” is now open for viewing – and screaming – at Rabobank HQ in Utrecht, Netherlands. Screaming, you ask? That’s exactly what visitors must do when the visit Alicia Framis’ “Screaming Room” exhibition. You scream, the waveform is recorded and translated instantly into a 3D model (a… Continue reading Scream A 3D Print, Literally

Shapeways’ Peek Into Imagination: Finds Apple’s Siri

Popular 3D print service Shapeways often runs contests to stimulate creativity – and increase their print volume. This past week saw the conclusion of a rather interesting competition to answer the abstract question, “What Does Siri Look Like?” Siri, of course, is Apple’s voice-powered omnipotent assistant.    There were multiple entries to the contest, each… Continue reading Shapeways’ Peek Into Imagination: Finds Apple’s Siri

Ten Years of Inexpensive 3D Printing

Industry giant Stratasys just reminded us that it’s actually been ten years since they introduced a low cost 3D printer to the world. The term “low cost”, is of course, relative. At the time 3D printers were industrial behemoths costing major dollars. The Dimension introduced in 2002 cost just under USD$30,000, enabling many small businesses… Continue reading Ten Years of Inexpensive 3D Printing

RAPID 3D Printed Clothing?

The annual RAPID additive manufacturing conference takes place this May in Atlanta and we’re expecting to see some interesting product announcements as usual.    However, this year there might be something unusual in the plan, since the conference just put out a call for designers to submit “your most innovative 3D printed fashion piece”.   … Continue reading RAPID 3D Printed Clothing?

Win an Objet 3D Printer

There seems to be a great many 3D printing contests lately, often offering a prize of “your object being 3D printed”. Some even offer a personal 3D printer as a grand prize. But the prize in Instructable’s “Make it Real” contest is a little different. Say, USD$50,000 different: they’re offering a complete Objet 30 3D… Continue reading Win an Objet 3D Printer

3D printing Down Under

Would you happen to be in the beautiful city of Adelaide, Australia on February 20th? You may be able to attend the “3D Printing Forum: The Next Industrial Revolution?”, which promises to be an interesting introduction to various 3D printing topics. According to the Australian Network for Art and Technology (ANAT), the event includes:   … Continue reading 3D printing Down Under

On The Road With 3D Printing

The Pocket Factory Project seems a little crazy at first, but then it starts to make more sense in this rapidly evolving 21st century. It’s two creative guys stuffed into a Prius, driving around the United States seeking inspiration for creative 3D printing.    Bilal Ghalib and Alex Hornstein are those guys and they’re traveling… Continue reading On The Road With 3D Printing

Send To Print/ Print To Send

We previously mentioned the exhibition at London’s Aram Gallery entitled “Send To Print/ Print To Send”, in which artists explore the possibilities using 3D printing technology. We just found a bit more information about this event.    ArtsThread discusses the opportunity and as in other industries, the Arts can use 3D printing for custom, one-of-a-kind… Continue reading Send To Print/ Print To Send

Published
Categorized as Event Tagged

Want To Attend A 3D Printing Conference?

Having unfortunately missed this year’s Consumer Electronics Show, we’ve been wondering what other conferences and trade shows exist that might include 3D printing content. Searches reveal what we think might be a fairly comprehensive list of major events involving 3D printing. We’ve not included numerous local events such as local Maker Faires.    CES, January… Continue reading Want To Attend A 3D Printing Conference?

Time to Enter The Extreme Redesign Contest

Stratasys’ annual Extreme Redesign Contest for students is open – but only until the deadline of February 2. If you’ve been thinking about entering, think no longer because you’d better fill out the forms straight away.    The contest enables students in grade school as well as university to enter a design (product, enhancement, art… Continue reading Time to Enter The Extreme Redesign Contest

CNET Names MakerBot’s Replicator Best of CES

CES has now closed and the media now reports on their observations. CNET produced a list of their “best 10 of CES”. On the list was the MakerBot Replicator personal 3D printer, winner of the “Best emerging tech product” category. Why the MakerBot instead of its competitor the 3D Systems Cube? According to CNET:  … Continue reading CNET Names MakerBot’s Replicator Best of CES

Unboxing A Stratasys

Brad Rigdon, the owner of PrintTo3D, a small 3D print service just received a brand new Stratasys Fortus 250mc commercial 3D printer. While we often see unboxing scenes of much smaller personal 3D printers, here’s an opportunity to see the unboxing of a much larger – and much more expensive – commercial 3D printer. Check… Continue reading Unboxing A Stratasys

BotMill Holiday Discounts

BotMill announced some serious discounts on their personal 3D printers just in time for holiday shopping.    The discounts apply to both their Axis kit and assembled Glider 3D printer. The kit is discounted USD$100 to USD$990 and the Glider is discounted USD$175 to only USD$1,320. Not only that, but they’ve also now include a… Continue reading BotMill Holiday Discounts

Christmas at Bits From Bytes

The folks at Bits From Bytes have an interesting giveaway taking place this holiday season: their Advent Calendar 2011. According to Wikipedia, an Advent Calendar is “a special calendar which is used to count or celebrate the days of Advent in anticipation of Christmas”. Typically it involves a surprise each day, and BFB is doing… Continue reading Christmas at Bits From Bytes

Up! 3D Printers On Sale

Want an Up! personal 3D printer? This just might be the right time to buy if you are located in the USA as they’re on sale.    Up3DUSA / X-Object has a special holiday deal underway. The first 100 buyers get an astonishing ONE THOUSAND DOLLARS OFF their purchase. This takes the price from USD$3,250… Continue reading Up! 3D Printers On Sale

Announcing Mallyable!

Fabbaloo is very pleased to announce our new venture: Mallyable!    Mallyable is a new online store providing easy-to-use, beautiful and low cost 3D models specifically designed for printing on personal 3D printers.   We take the time to carefully design models ready to print on most personal 3D printers: they’ve been sized, oriented and… Continue reading Announcing Mallyable!

Published
Categorized as Event Tagged

The Customised Design Event

We’ve learned of an upcoming event for those in the UK interested in 3D printing: The University of Hertfordshire and the British Library are putting on a seminar on 7 December entitled, “Customised Design”. In the three hour event, course leader Mark Bloomfield (founder of Electrobloom) will:    … talk about how customised goods and… Continue reading The Customised Design Event

Open Source 3-D Printer Design Competition

Queen’s University and the Natural Sciences and Engineering Research Council of Canada are sponsoring a new competition for sustainable development. The competition asks that you “design sustainable technologies and their components for printing on open source 3-D printers”, specifically the RepRap.    What exactly is a “sustainable technology”? We’re not sure, because that’s up to… Continue reading Open Source 3-D Printer Design Competition

Extreme Redesign Contest Winners for 2011

The winners in Dimension’s Extreme Redesign contest for this year have been announced! As is the case every year, the contest has three major categories: College, Art & Architecture, Middle/High School. Buildings & Bridges and Puzzles & Games.    You can check out all the winners at the link below, but a couple of items… Continue reading Extreme Redesign Contest Winners for 2011

3D Printed Crabs

No, we’re not talking about pretty little crab toys you can print and hand out to your 8 year old nephew. Instead we’re talking about an innovative project undertaken by one of MakerBot’s artists in residence, Miles Lightwood.    The project is concerned with the fate of the lowly Hermit Crab, a crustacean currently facing… Continue reading 3D Printed Crabs

Crania Anatomica Filigre Results

KickStarter, the crowdsourced fundraising site continues to amaze us. As does this particular project, Crania Anatomica Filigre. As you can see, it’s an extremely cool 3D print of a stylized skull by Chicago-based designer Joshua Harker.    Harker’s fundraising goal was to collect USD$500 and get his work seen and touched by more people. It… Continue reading Crania Anatomica Filigre Results

3D Printing Event Soon

If you happen to be in Eindhoven on the 25th, you might head down to 3D Printing Event 2011. The theme of the event is something we focus on: 3D printing at home.    You’ll be able to attend seminars that discuss the theme in depth, and you can also peruse the offerings of many… Continue reading 3D Printing Event Soon

Free 123D T-Shirts!

Autodesk is running a promotion to raise interest in their new web-based 3D modeling tool, 123D, which we’ve written about before.    You don’t get a t-shirt for nothing, though. You have to make an image of your original 3D Jack-o-lantern design and share it within their online gallery. This could be easier than you… Continue reading Free 123D T-Shirts!

Industrial Revolution 2.0 Held Over

What? You weren’t able to attend the London Design Festival this year and missed out seeing Murray Moss’s “Industrial Revolution 2.0” display? Well, now you can, because this exhibition has been held over at London’s Victoria and Albert Museum. Instead of ending now, it’s been extended until early November.    Evidently the exhibition was extremely… Continue reading Industrial Revolution 2.0 Held Over

Something Cooking at MCOR?

MCOR makes 3D printers that use inexpensive common paper as their print material, and they’ve been relatively successful. But we’re hearing something rather strange about a new initiative they’re about to release soon. Their new program is called “freeDrevolution” – and it supposedly involves free 3D printers from MCOR.    What? *FREE* 3D printers?   … Continue reading Something Cooking at MCOR?

Published
Categorized as Event Tagged

Exclusive Video: 3D Printed Car Unveiled

Last night Fabbaloo attended the official unveiling of the Urbee 3D printed car, which we’ve covered previously. The Urbee is an ultra-efficient urban vehicle prototype that changes travel paradigm – and also engineering paradigms as its entire body was 3D printed using Stratasys 3D print services. Click the video above to see the unveiling, and… Continue reading Exclusive Video: 3D Printed Car Unveiled