This week’s selection is the Gnome Vase by Thangs contributor Decorartor.
Design
Affordable Kevlar Sheath Mod Increases Print Speed and Accuracy for Bowden 3D Printers
I’m looking at an intriguing upgrade for Bowden 3D printers to increase quality and print speed. Bowden systems are common in the desktop 3D printer market due to their low manufacturing cost. The idea is to put the extruder motor away from the toolhead to reduce the toolhead’s weight. This allows the toolhead to move… Continue reading Affordable Kevlar Sheath Mod Increases Print Speed and Accuracy for Bowden 3D Printers
Design of the Week: DOPPIONODO
This week’s selection is DOPPIONODO by the Polytechnic of Bari. DOPPIONODO, in Italian, means “Double Knot”, and that precisely describes the complex structure of this sculpture. DOPPIONODO is a large, twisted sculpture designed at the Polytechnic of Bari by Marco Massafra & Prof. Giuseppe Fallacara,and 3D printed by Concr3de. The complex, knotted structure was printed… Continue reading Design of the Week: DOPPIONODO
Design of the Week: Vincent Van Gogh Portrait
This week’s selection is the Vincent Van Gogh portrait by Luke Taylor of Polymaker.
Design of the Week: 3D Printed Mechanical TV
This week’s selection is the 3D Printed Mechanical TV by YouTuber bitluni.
Design of the Week: Stereographic Projection
This week’s selection is the Stereographic Projection by mathematician Henry Segerman.
Design of the Week: DISCOVER 3D
This week’s selection is the DISCOVER 3D by LEMKI Robotix and iScale3D.
Design of the Week: Mac mini Pro
This week’s selection is the Mac mini Pro by MakerWorld contributor Jerrod Hofferth.
Design of the Week: Side Bin
This week’s selection is the highly over-engineered Side Bin by Printables contributor SMACKMAX.
Design of the Week: Nadarra Wall
This week’s selection is the Nadarra Wall by architect Barry Wark.
Design of the Week: BentoBox v2.0 Carbon Filter
This week’s selection is the BentoBox v2.0 Carbon Filter by Printables contributor thrutheframe.
Design of the Week: Phone Chair
This week’s selection is the Phone Chair Version 2 by Printables contributor mybrainwaves.
Design of the Week: Filament Estimator
This week’s selection is the Filament Estimator by MakerWorld contributor Northeast Tiger Walking Again.
Design of the Week: Counter Bin 2.0
This week’s selection is the Counter Bin 2.0 by Printables contributor FlaminSpike.
Design of the Week: Pillars of Creation
This week’s selection is the Pillars of Creation by the Space Telescope Science Institute.
Design of the Week: World’s Largest Benchy
This week’s selection is the World’s Largest Benchy by Emily the Engineer.
Design of the Week: Spice Rack Pullout
This week’s selection is the Spice Rack Pullout with Metal Rods by Printables contributor SpongyBob.
Design of the Week: Ultimate Filament Spool Enclosure for AMS Lite
This week’s selection is the Ultimate Filament Spool Enclosure for AMS Lite by Makerworld contributor Supergrapher.
Design of the Week: COMETE Bag
This week’s selection is the COMETE Bag by Laura Deweilde and Thomas Batigne.
Design of the Week: Black Betty
This week’s selection is the incredibly silly Black Betty, the Bambu-lamb by Makerworld contributor Halfway_Engineered.
How 3DCP is Breaking Free from Conventional Designs
When will we see radical designs in 3D printed buildings and structures? Maybe now, it seems.
Design of the Week: Alyx Bike
This week’s selection is the Alyx bicycle by FUTUREWAVE.
Design of the Week: The Great Calibrator V3
This week’s selection is the The Great Calibrator V3 by mechanical engineer Claudio Girolami.
Design of the Week: Ravioli Roller and Stamp
This week’s selection is the Ravioli Roller and Stamp by Printables contributor Daniel Black.
Design of the Week: Radiolarian Print
This week’s selection is the Radiolarian print by Nervous System.
Design of the Week: Propulsive Landing Rocket
This week’s selection is the Propulsive Landing Rocket by JRD Propulsion.
Design of the Week: Nano-sized Benchy
This week’s selection is the Textured Benchy by Andrea Bertoncini.
Design of the Week: Avatar Jake & Neytiri
This week’s selection is the life-size Avatar sculptures by Gentle Giant Studios.
Design of the Week: Parametric Hose Connector
This week’s selection is the Parametric Hose Connector generator by MakerWorld contributor ostat.
Design of the Week: Fieldstone
This week’s selection is the Fieldstone 3D printed table by Erco Lai.
Design of the Week: Plant Pot with Hidden Box
This week’s selection is the Plant Pot with Hidden Box by Factorian Designs.
Design of the Week: Overengineered Doorstopper
This week’s selection is the Overengineered Doorstopper by Thingiverse contributor Darth Biomech.
Design of the Week: OpenSCAD Elephant
This week’s selection is the OpenSCAD Elephant by MakerWorld contributor edisadilovic, who is fully blind.
Design of the Week: Ceramic House
This week’s selection is Ceramic House by Studio RAP.
Design of the Week: M3 Bolt Sorter
This week’s selection is the Gridfinity M3 Bolt Sorter by MakerWorld contributor LayerLux3D.
Design of the Week: Neanderthal Woman
This week’s selection is the Neanderthal Woman 3D model by researchers at the University of Cambridge.
Design of the Week: Solder Scroll
This week’s selection is the Solder Scroll by Printables contributor Victor.
Design of the Week: V-Spooler
This week’s selection is the V-Spooler by MakerWorld contributor Fyrby Additive.
Design of the Week: Easter Chocolate Egg
This week’s selection is the Easter Chocolate Egg by industrial designer Marta Ribera Bellmunt.
Michele di Carlo’s 4Steps Concept Opens New Approaches in 3D Printed Fashion
A product designer has developed a new 3D printing approach that could open up new categories of fashion.
Design of the Week: Macintosh Studio
This week’s selection is the Macintosh Studio by Mini product designer Scott Yu-Jan.
Design of the Week: Abstract Hedge
This week’s selection is the Abstract Hedge wall sculpture by Darya Aulaska of Extrudix.
Design of the Week: Tiny A1 Mini and AMS Lite Kit Card
This week’s selection is the Tiny A1 Mini and AMS Lite Kit Card by MakerWorld contributor jaayjeee.
Design of the Week: Calilantern
This week’s selection is the Calilantern by Vector 3D.
Design of the Week: Sanding Blocks
This week’s selection is the Sanding Blocks collection by Printables contributor Jan Štech.
Design of the Week: Apple Vision Pro Stand
This week’s selection is the Apple Vision Pro Stand by Christian Selig.
Design of the Week: Croc Toes
This week’s selection are the Croc Toes by Cults contributor HBRDL.
Design of the Week: Planet Mars Tactile Model
This week’s selection is the Planet Mars Tactile Model by the Astronomical Observatory of the University of Valencia.
Design of the Week: Knife Sharpener
This week’s selection is the Knife Sharpener by Printables contributor firstgizmo.
Design of the Week: 3D Printed Flying Car
This week’s selection is the 3D Printed Flying Car by Alan Zhang.
Design of the Week: Gyro 7 Printable Jointed Cat
This week’s selection is the Gyro 7 Printable Jointed Cat by Printables contributor Neybao.
Design of the Week: Life Size Triceratops Skull
This week’s selection is the massive Triceratops Skull by Prusa Research.
Design of the Week: Hìtëkw, a 3D Printed Metal Tennis Racket
This week’s selection is Hìtëkw, a 3D Printed Metal Tennis Racket by All Design Lab and Protolabs.
Design of the Week: 2024 Shutter Shades
This week’s selection is the 2024 Shutter Shades by Printables contributor Teque5.
Design of the Week: Geared Christmas Tree Spiral
This week’s selection is the Geared Christmas Tree Spiral by Cults contributor ENJOYREVIT.
Design of the Week: Floating Buoy Keychain
This week’s selection is the Floating Buoy Keychain by MakerWorld contributor spookycromch.
Design of the Week: Sea Urchin Hat
This week’s selection is the Sea Urchin Hat concept.
Design of the Week: Slide Glide Cyclides
This week’s selection is the Slide Glide Cyclides by mathematician Henry Segerman.
Design of the Week: Hazmat Collection
This week’s selection is the hazmat collection by SutoSuto.
Design of the Week: Sound Absorbing Facade
This week’s selection is the Sound Absorbing Facade by David Fluß of TU Darmstadt.
Design of the Week: LIfe Size Body Print
This week’s selection is the amazing life size body print made by Matty Benedetto.
Design of the Week: Toothbrush Holder Insert
This week’s selection is the Toothbrush Holder Insert by Printables contributor DireLlama.
Design of the Week: Reaction Jewelry Collection
This week’s selection is the Reaction Jewelry collection from Nervous System.
Design of the Week: “G” Award Trophy
This week’s selection is the G Award, produced on HP 3D printing equipment.
Design of the Week: Experimental Disney Robot
This week’s selection is the adorable prototype robot developed by Disney Research.
Design of the Week: ECO Lamp
This week’s selection is the ECO Lamp by COLORISED and GREENFILL3D.
Design of the Week: Wheelchair Defense Spikes
This week’s selection are the Wheelchair Defense Spikes by maker Ryan Beal.
Design of the Week: Fastest Drone in the World
This week’s selection is the Fastest Drone in the World by Luke Maximo Bell.
Design of the Week: Filament Shelf Brackets
This week’s selection are the Filament Shelf Brackets by freelance 3D designer Nick Meyer.
Design of the Week: Bonnie Prince Charlie
This week’s selection is a lifelike recreation of Bonnie Prince Charlie.
Anouk Wipprecht Releases Mind-Controlled, 3D Printed ScreenDress
Designed with Onshape, manufactured with the new HP Jet Fusion 5420W system.
Design of the Week: MiniSander
This week’s selection is the MiniSander by Instructables contributor Modelskitsdeluxe.
Design of the Week: 3D Printed Airless Bicycle Tire
This week’s selection is the 3D Airless Bicycle Tire by designer Brendan Carberry.
Upgrade Your IKEA Experience with New Assistive 3D Prints from Enable 3D and Uppgradera
Enable 3D and Uppgradera have released a new set of assistive 3D prints designed for IKEA products.
Design of the Week: Filament Winder
This week’s selection is the Filament umspulen by Thingiverse contributor Georg Wittschier
Design of the Week: Foldable Hanger
This week’s selection is the Foldable Hanger by Printables contributor wuguigui.
Fashioning Sustainability: ROOTS 3D-Printed Footwear Fuses Artistry and Eco-Consciousness
Charles R. Goulding and Preeti Sulibhavi look at a new 3D printed design that was inspired by nature.
Design of the Week: Robot Gripper
This week’s selection is the electronics-free robot gripper by researchers at the University of California San Diego.
Design of the Week: 3D Printed Concept Slide
This week’s selection is the “ROOTS” concept slide by Kitty Shukman.
Design of the Week: Bowden Tube Cap
This week’s selection is the Bowden Tube Cap by Printables contributor WaltzingKea.
Design of the Week: Zaisanamynodon Fossil
This week’s selection is the Zaisanamynodon fossil print by the Western Science Center.
Design of the Week: Pepper Mill Funnel
This week’s selection is the Pepper Mill Funnel by Maxime Hoste.
Design of the Week: OceanGate Titan Submersive
This week’s selection is the OceanGate Titan Submersive by designer Tobi Takenn.
Design of the Week: Print-in-Place Vise Grips
This week’s selection are the 3D printed Vise Grips by Adam Cook.
Design of the Week: 3D Printable Pirate Ship
This week’s selection is the Fully 3D Printable Pirate Ship by Conner Sinewe.
Design of the Week: Divje Babe Bone Flute
This week’s selection is the detailed reconstruction of the Divje Babe Bone Flute by Matt Gilbert.
Design of the Week: Pool Noodle Sword Handle
This week’s selection is the Pool Noodle Sword Handle by Martin Kozak.
Design of the Week: TSUGINOTE TEA HOUSE
This week’s selection is the TSUGINOTE TEA HOUSE by designers Atsumi Kei and Nicholas Préaud.
Design of the Week: Palm Ratchet Knob
This week’s selection is the Palm Ratchet Knob by Printables contributor Shiura.
Design of the Week: Cute Tardigrade
This week’s selection is the cute Tardigrade 3D model by designer Matt Meyer of MatMire Makes.
Design of the Week: Print-in-Place Box
This week’s selection is the Print-in-Place Box by Printables contributor andyroo770.
Design of the Week: Stone of Destiny
This week’s selection is the Stone of Destiny by Historical Environment Scotland.
Extrabold and Honoka Show Off Resin 3D Printed Furniture in Milan
The TATAMI ReFAB PROJECT received the second prize award from the SaloneSatellite organizers.
Design of the Week: RoyBot, a Robot Painter
This week’s selection is the amazing RoyBot robot painter by YouTuber Nerdtronic.
Design of the Week: Crayola Marker Lid System
This week’s selection is the Crayola Marker Lid System by Thingiverse contributor Chris Prendergast.