Design of the Week: FilamentMeter
This weekās selection is the incredible FilamentMeter by ARDUINONMORE.
Who’s The Biggest In 3D Printing, October 2, 2022
Once again we take a look at the valuations of the major 3D printing companies over the past week.
Human Digital Twinning and Medical 3D Printing
Charles R. Goulding and Preeti Sulibhavi look at digital twinning and 3D printing.
Eight Dumbest 3D Printing Mistakes
Youāve probably done them all: the eight dumbest 3D printing mistakes ā FFF edition.
SnapEDA’s Syndication Network Liberates Millions of 3D Models
SnapEDA announced a new Syndication Network that releases āmillionsā of 3D models.
The Water Infrastructure Crisis and 3D Printing
Charles R. Goulding and Preeti Sulibhavi propose several ideas for leveraging 3D printing technology to solve today's water crises.
Design Strategies Needed to Unlock 3D Printingās Potential
A Protolabs engineerās perspective on the right DfAM approach.
An Easy Way To Start Non-Planar 3D Printing
I found a very easy way to start non-planar 3D printing.
Only Games Gets Color, And An Exclusive Reader Discount!
Only Games announced a new full color 3D printing capability.
A Different Way To 3D Print Rockets
Firehawk Aerospace is 3D printing rockets, but not in the way you might think.
Herman Miller and Knoll Merger Creates 3D Printing Opportunities
Charles R. Goulding and Andressa BonafƩ look at how innovation could be enabled by more 3D printing by major furniture producers.
Hands On With The Kingroon KP5L 3D Printer, Part 3
Our look at the Kingroon KP5L 3D printer concludes with a look at software, print quality and final thoughts.
Hands On With The Kingroon KP5L 3D Printer, Part 2
Our lab test of the Kingroon KP5L continues with a look at setup, calibration and operations.
Hands On With The Kingroon KP5L 3D Printer, Part 1
Our lab has been quite busy lately, and this time weāre looking at the Kingroon KPL5 3D printer.
Gulf Coast Military Shipbuilding and 3D Printing
Charles R. Goulding and Preeti Sulibhavi look at how 3D printing use can be increased by shipyards constructing and refurbishing vessels.
Stratasys Introduces Certification Program
Stratasys has introduced a ācertification programā for those involved with their FDM 3D printing technology.
Rivelen Robotics’ Metal Post Processing Technology
Rivelen Robotics provides a very interesting metal post processing solution for production.
AddUp Pursues Different Engagement Model
AddUp announced a joint venture, and itās a very different way to engage with clients.
Book of the Week: A Guide to Additive Manufacturing
This weekās selection is āA Guide to Additive Manufacturingā by editors Damir Godec, Joamin Gonzalez-Gutierrez, Axel Nordin, Eujin Pei and Julia UreƱa AlcĆ”zar.
Unlocked: 3D Printing By Drones
New research has proven it is possible to use drones to 3D print large objects.
When Is Construction 3D Printing Going To Catch On?
Construction 3D printing should eventually be a massive business, but when, exactly, will this occur?
Commercial Submarines and 3D Printing
Charles R. Goulding and Preeti Sulibhavi look at the use of 3D printing for manufacturing submersibles.
Design of the Week: Full Color Vi
This weekās selection is the detailed 3D model of Vi from Arcane by Magnavis and 3D printed by Barry Webb.
Who’s The Biggest In 3D Printing, September 25, 2022
Once again we take a look at the valuations of the major 3D printing companies over the past week.
The CHIPS Act and 3D Printing
Charles R. Goulding and Preeti SulibhaviĀ examine how the new CHIPS and Science Act could affect 3D printing.
Hands On With a $189 3D Printer: The Anycubic Kobra Go, Part 3
Our test of the Kobra Go desktop 3D printer concludes with a look at print quality and our final thoughts.
Hands On With a $189 3D Printer: The Anycubic Kobra Go, Part 2
Our test of the Kobra Go desktop 3D printer continues with a look at Setup, calibration and operations.
Hands On With a $189 3D Printer: The Anycubic Kobra Go, Part 1
Just prior to its release, we obtained a Kobra Go 3D printer from Anycubic and gave it a good test.
A FRESH Take on Liquid Possibilities in 3D Printing
FluidFormās FRESH technologies may offer a solution to 3D printing challenging materials such as collagen and silicone.
SLM Solutions To Build World’s Largest Metal 3D Printer
SLM Solutions is the major contractor on a project set to build what should be the largest 3D printer ever.
trinckle’s Fixture Designer Shows How It’s Done
Iāve been looking at trinckleās Fixture Designer software, and itās quite impressive.
The Zortrax Inkspire 2 Resin 3D Printing System
Zortrax announced a new suite for resin 3D printing, focused on the new Inkspire 2.
International Glass Industry Business Planning and 3D Printing
Charles R. Goulding and Preeti Sulibhavi look at recent events and how they are changing glass production.
The SunLu Terminator3 3D Printer
Sunlu announced a new desktop 3D printer that could be among the fastest in its class.
Question of the Week: Resin 3D Printer Mats?
This weekās question relates to some mats we used in a prior story.
AM Apocalypse? What Happens When Shipping Costs Drop?
Iāve been doing some thinking about what might unfold in the next year or so.
Indiaās Economic Growth Rate and 3D Printing
Charles R. Goulding and Preeti Sulibhavi look at the use of 3D printing technology in India.
The Most Awful 3D Printer Filament Disaster I’ve Ever Encountered
Iāve got a bit of a filament problem to solve.
Essentium Announces Major Recyclable Materials Partnership
Essentium announced today a major materials partnership with Braskem that should provide new types of 3D print materials.
Meltio Partnership Creates Robotic 3D Printer
Melito has partnered with Ziknes to develop a robotic metal 3D printer.
Book of the Week: The AI Cookbook
This weekās selection is āThe AI Cookbook: A taste of the futureā by Paolo Rosson.
Two New 3D Print Safety Reports You Must Read
Researchers from Chemical Insights and Prusa Research have published reports on 3D printer safety that should be standard reading for all participants.
The Peel 3 Handheld 3D Scanner
peel 3D announced a new handheld 3D scanner: the peel 3.
Lynxter Announces New Delta Direct Extruder
Lynxter announced a new direct drive toolhead, the FIL21.
Design of the Week: Queen Elizabeth II
This weekās selection is the 3D model of Queen Elizabeth II by CGTrader contributor Vlad.
Who’s The Biggest In 3D Printing, September 16, 2022
Once again we take a look at the valuations of the major 3D printing companies over the past week.
Milwaukee Tools and 3D Printing
Charles R. Goulding and Preeti SulibhaviĀ look at how 3D printing could be used at Milwaukee Tools.
New AM Materials Round Up, September 16, 2022
Several new AM materials were announced in the past week.
What Is MatterHackers Doing With the US Navy?
MatterHackers announced a highly unusual arrangement with the US Navy.
FDA Approves Over-the-Counter Hearing Aids and 3D Printing Can Help
Charles R. Goulding and Preeti Sulibhavi look at the potential for use of 3D printing to produce hearing aids on demand.